Product description

The Low Overload profile comprises 150 % for 3 s, 110 % for 57 s and 100 % for 240 s. The High Overload profile comprises 200 % for 3 s, 150 % for 57 s and 100 % for 240 s. The defined overload cycles allow brief operation at 200% or 150% current and are relevant for conveyors, pumps, fans, mixers and other variable machine loads. An ambient temperature range from -10 to +50 °C is stated for High Overload. The Siemens data sheet documents a height of 512 mm, a width of 275 mm and a depth of 204 mm. Siemens 6SL3224-0BE31-5AA0 is a SINAMICS G120 Power Module PM240 in frame size FSD. As a PM240 Power Module, it provides the power electronics for three-phase induction motors and selected synchronous motors and combines with a suitable Control Unit to form a complete frequency inverter. This version operates on 380 to 480 V AC with ±10% tolerance and mains frequencies from 47 to 63 Hz. It operates on three-phase supplies from 380 to 480 V with a permissible voltage tolerance of ±10 %. The documented line-frequency range is 47 to 63 Hz. The net weight of the individual Power Module is 16.00 kg. Frame size FSD provides IP20 protection and dimensions of 512 × 275 × 204 mm. Complete overall dimensions are therefore 512 × 275 × 204 mm in the order height, width and depth. High-overload operation is documented at 15 kW and 32 A; applications with lower overload demand can use the low-overload rating of 18.5 kW and 38 A. High Overload operation is rated at 15 kW and 32 A output current. For Low Overload, Siemens states 18.5 kW and 38 A. The Siemens 6SL3224-0BE31-5AA0 is a power module from the modular SINAMICS G120 inverter family. Before replacement, the complete MLFB 6SL3224-0BE31-5AA0, Control Unit, mains and motor connections, motor rating, braking resistor, cooling, EMC concept, software version and secured parameter set must match. Order number, frame size, ratings, overload profiles, filter, braking chopper, protection, dimensions and net weight identify version 6SL3224-0BE31-5AA0. The enclosure is specified with degree of protection IP20. The module is supplied without a Control Unit or operator panel; control methods, communication and safety functions therefore depend on the installed G120 Control Unit. This preserves the existing G120 configuration and enables recommissioning without assumptions about neighbouring variants.