Siemens 6SN1145-1BA01-0DA1
€5,390.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6SN1145-1BA01-0BA1 is a regulated infeed/regenerative feedback module from the SIMODRIVE 611 drive family. The Siemens configuration manual assigns the complete order number to the internally cooled 16-kW version. For infeed operation, the table specifies 16 kW rated power, 21 kW S6 power at a 40 % duty cycle and 35 kW peak power. Continuous regenerative power is also specified as 16 kW, with 35 kW documented as the regenerative peak value. The mains-voltage range is 3AC 400 V -10 % to 480 V +6 %, and mains frequency is 50/60 Hz ±10 %. Rated current is 27 A at 400 V and 22.5 A at 480 V. The manual also lists 600/625/680 V as DC-link output-voltage values. The device has a module width of 100 mm and internal heat dissipation with a forced fan. Documented switches S1.5 and S1.6 identify the operating modes for infeed control and line-current waveform. Existing technical data also specify a 10 mm² mains-connection cross-section, an M5 protective-conductor connection and a tightening torque of 1.5 to 1.8 Nm. SIMODRIVE 611 modules of this construction have a height of 480 mm; for internal heat dissipation, depth is documented as 288 mm without connectors and optional attachments. Complete external dimensions of Siemens 6SN1145-1BA01-0BA1 are therefore 100 × 480 × 288 mm in width × height × depth order. Documented weight of the individual module is 10.5 kg. Dimensions and weight refer to the device without shipping packaging. The specification table concludes with Dimensions and Weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMODRIVE 611 |
| Manufacturer/order/identification number | 6SN1145-1BA01-0BA1 |
| Device type | Infeed/regenerative feedback module |
| Control type | regulated |
| Rated power | 16 kW |
| S6 power | 21 kW at 40 % duty cycle |
| Cooling method | Internal heat dissipation with forced fan |
| Line contactor | with normally closed contact |
| Infeed operation | regulated or unregulated via switch S1.5 |
| Line-current waveform | square-wave or sinusoidal current operation via switch S1.6 |
| Line connection cross-section | 10 mm² |
| Protective-conductor connection | M5 |
| Tightening torque | 1.5 to 1.8 Nm |
| Matching HFD line reactor | 6SL3000-0DE21-6AAx |
| Dimensions | 100 × 480 × 288 mm (W × H × D) |
| Weight | 10.5 kg |
Related products
Go to shop 
Siemens 6SN1146-1AB00-0BA0
€570.00
Siemens 6SN1123-1AA00-0BA1
€1,250.00
Siemens 6SN1118-0NJ01-0AA2
€810.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the external dimensions of Siemens 6SN1145-1BA01-0BA1?
Complete external dimensions are 100 × 480 × 288 mm in width × height × depth order.
How much does Siemens 6SN1145-1BA01-0BA1 weigh?
The Siemens manual documents a weight of 10.5 kg for the individual module.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.