ABB AI930B
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The ABB 81EU01D-E with the order number GJR2391500R1210 is a universal input module for the PROCONTROL-P system. Documented identifiers and values: 16; 19234; 48 V; 60 V; 20; 20; 20; 12; 20-; 10. The type identification alone is not sufficient for a controlled exchange because the connected signal types and monitoring functions are configured depending on the application. Diagnostic messages are displayed on the front via ST for a general malfunction and SG for a module malfunction. Buyers can compare these product details with the designation and technical requirements in their own application documents. The information covers device classification, configuration details, electrical data, interfaces and mechanical attributes where listed. Communication with the control takes place via the standard interface of the PROCONTROL station bus. This industrial component is described by its product identification and listed technical characteristics. The product data identifies the documented component variant and its listed technical characteristics. Parameterized values are retained in the EEPROM even after a power failure. Up to four limit values can be set for each analog signal.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | PROCONTROL P / 81EU01 |
| Manufacturer/order/identification number | 81EU01D-E |
| Input channels | 16 individually parameterizable functional units |
| Binary inputs | Single contacts, changeover contacts and electronic sensors |
| Sensor input | Inductive proximity sensors according to NAMUR DIN 19234 |
| Analog input ranges | 0 to 20 mA, 4 to 20 mA and 0 to 5 mA |
| Resolution | 12 bit at 0 to 20 mA and 4 to 20 mA; 10 bit at 0 to 5 mA |
| Two-wire transmitter connection | 4 to 20 mA, supply from the input module |
| Four-wire transmitter connection | 0 to 20 mA, 4 to 20 mA or 0 to 5 mA with external supply |
| Contact-sensor supply | 48 V from the module, with or without monitoring |
| External supply | Contacts or electronic sensors up to 60 V, without monitoring |
| Interface | PROCONTROL station bus |
| Memory function | EEPROM for fail-safe storage of programmed values |
| Diagnostic indicators | ST for a general fault and SG for a module fault |
| Functional units | Input operating mode individually configurable for each functional unit |
| Analogue-input accuracy | less than 0.3 % over 0 to 70 °C; upon delivery less than 0.1 % at 23 °C |
| Limit function | Up to four limit values per analog signal |
| Dimensions | 6 U × 1 division × 160 mm (H × W × D) |
| Weight | approx. 0.5 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which signals does the ABB 81EU01D-E process?
The module processes binary contact and electronic-sensor signals, NAMUR proximity sensors and analogue current signals in the ranges 0 to 20 mA, 4 to 20 mA and 0 to 5 mA.
How many inputs does the ABB GJR2391500R1210 have?
The module provides 16 function units, each of which can be configured for the required input mode.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.