ABB AO930B
€580.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
ABB 88TV01E, order number GJR2346500R1011, is a station-bus controller module from the PROCONTROL P family. Revision R1011 carries the module marking G-G. It coordinates all serial data communication on the station bus. Data transfer by the connected PROCONTROL modules is performed under the control of the 88TV01. The controller specifies the system and station addresses and transfers them to the other modules in the station. Each module address is assigned automatically through the allocated slot when the module is inserted. Documented address ranges are 0 to 3 for systems, 1 to 249 for stations and 0 to 58 for modules. The controller can also issue a station-bus reset and switch off the transmitter of a connected module. Corresponding diagnostic messages distinguish a bus-coupling fault, an active station-bus reset and a module transmitter disconnected by the 88TV01. The mechanical format is a PROCONTROL plug-in board with 6 height units, 1 division and 160 mm depth. Complete board size is therefore stated as 6 U × 1 division × 160 mm. Product-specific weight is approx. 0.42 kg. Connection uses a 48-pole type-F edge connector according to DIN 41612. Type number, order number, revision and marking distinguish this specific board from other 88TV01 versions. Other revisions can carry different order numbers and are not equivalent solely because they share the family designation.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | PROCONTROL P / P14 |
| Manufacturer/Order/Identification number | 88TV01E |
| Device type | Station-bus controller module |
| Version | R1011 |
| Module marking | G-G |
| Interface and system application | PROCONTROL P station bus |
| Communication role | Controls all data communication on the station bus |
| Communication and data transmission | Serial transmission through the standard station-bus interface |
| System address range | 0 to 3 |
| Station address range | 1 to 249 |
| Module address range | 0 to 58 |
| Address assignment | Common specification of the system and station addresses |
| Slot addressing | Module address is set automatically when the module is inserted |
| Bus-control function | Data transfer under the control of the 88TV01 |
| Station-bus reset | Issues a station-bus reset |
| Transmitter control | Switches off a module transmitter through the 88TV01 |
| Diagnostic scope | Bus coupling, station-bus reset and module-transmitter disconnection |
| Dimensions | 6 U × 1 division × 160 mm (H × W × D) |
| Weight | approx. 0.42 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What is the board size of ABB 88TV01E?
The board uses 6 height units, 1 division and 160 mm depth, stated as 6 U × 1 division × 160 mm.
How much does ABB 88TV01E weigh?
The product-specific documented weight is approx. 0.42 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.