ABB AI930B
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
ABB documents redundant power and communication, Hot Configuration in Run, Hot Swap, advanced diagnostics, FDT/DTM configuration, G3 coating and automatic diagnostics. DP910N is appropriate where an existing S900 type N station requires frequency, pulse or counting channels connected to NAMUR sensors or dry contacts in its S900-I/O architecture. ABB DP910N provides frequency and counting functions within the S900 I/O family for type N stations in safe, non-hazardous areas. Documented identifiers and values: DP910N; S900-I/O; FI2; 104; 20; 104 mm; 0.125 kg. ABB identifies DP910N as Frequency Input FI2. These capabilities distinguish DP910N from a standard digital input module, even though the mechanical format is similar. A mechanically similar module without the FI2 functions would not reproduce the configured frequency measurement, counting logic or direction detection. The module measures 104 x 20 x 104 mm and has a net weight of 0.125 kg. The product data also specifies 2 function blocks, reset through the fieldbus or a control input, status outputs and direction detection. Short-circuit and wire-break detection and electrical isolation between input and bus and between input and power are further replacement criteria. System communication uses PROFIBUS DP, so the module must match the installed station and control-system architecture.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | S900 I/O |
| Manufacturer/Order/Identification number | 3KDE175363L9100 |
| Equipment type | S900 I/O module |
| ABB module designation | DP910N Frequency Input (FI2) |
| System version | S900 I/O type N, safe non-hazardous area |
| Communication | PROFIBUS DP at system level |
| Channel type | DI |
| Input channels | 2 |
| Input function | dry contacts or NAMUR proximity switches |
| Measurement function | frequency measurement or counting with reset through the fieldbus or a control input |
| Diagnostics | advanced diagnostics, short-circuit and wire-break detection |
| Maintenance functions | Hot Configuration in Run and Hot Swap |
| Isolation | input to bus and input to power |
| Coating | G3 coating for all components |
| Dimensions | 104 x 20 x 104 mm |
| Cooling method | passive I/O module assembly |
| Weight | 0.125 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for ABB DP910N?
The full manufacturer and type number DP910N is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.