ABB AI930B
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Documented identifiers and values: DX910B; S900-I/O; DIO8-B; G3; 104; 20; 104 mm; 0.125 kg. ABB also documents redundant power and communication, Hot Configuration in Run, Hot Swap, advanced diagnostics, FDT/DTM configuration, G3 coating and automatic diagnostics. DX910B measures 104 x 20 x 104 mm and weighs 0.125 kg. ABB identifies DX910B as Digital Input or Output DIO8-B for S900 I/O type B. ABB DX910B is a configurable S900 digital module for mixed input and output tasks rather than a fixed standard DI or DO module. This combination supports process applications where discrete signals and small valve outputs share one S900 station. The documented value for System version is S900 I/O type B, Zone 2 installation with intrinsically safe field devices. The specification lists System version: S900 I/O type B, Zone 2 installation with intrinsically safe field devices. The documented value for Equipment type is S900 I/O module. Short-circuit and wire-break detection, electrical isolation between input and bus and between input and power, and a common return conductor for inputs and outputs are further technical characteristics. Replacement selection must consider the complete part number, type B hazardous-area version, NAMUR or dry-contact inputs, valve-output function and mixed I/O configuration. ABB specifies dry contacts or NAMUR proximity switches on the input side and low-power intrinsically safe valves on the output side.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | S900 I/O |
| Manufacturer/Order/Identification number | 3KDE175312L9100 |
| Equipment type | S900 I/O module |
| ABB module designation | DX910B Digital Input or Output (DIO8-B) |
| System version | S900 I/O type B, Zone 2 installation with intrinsically safe field devices |
| Communication | PROFIBUS DP at system level |
| Channel type | DX |
| I/O channels | 8, configurable as a mix of inputs and outputs |
| Input function | dry contacts or NAMUR proximity switches |
| Output function | output for low-power intrinsically safe valves |
| Diagnostics | advanced diagnostics, short-circuit and wire-break detection |
| Maintenance functions | Hot Configuration in Run and Hot Swap |
| Isolation | input to bus and input to power |
| Coating | G3 coating for all components |
| Dimensions | 104 x 20 x 104 mm |
| Cooling method | passive I/O module assembly |
| Weight | 0.125 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for ABB DX910B?
The full manufacturer and type number DX910B is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.