Control Techniques SP1405
€962.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Control Techniques SP1403 is a frame-size 1 universal drive in the Unidrive SP series. The basic unit uses three-phase input and output at 380 to 480 V AC ±10 %. Maximum continuous current is 4.2 A and maximum peak current is 7.3 A. Typical motor power is 1.5 kW / 2 hp. The controller supports open loop, closed loop, and servo control. Open-loop output frequency spans 0 to 3000 Hz. A two-wire RS485 interface provides ANSI or Modbus RTU. The control-cabinet unit has IP20 / NEMA 1 protection and uses forced-air cooling. The tall, narrow enclosure has a front operating surface, lateral airflow paths, and a rear mounting contour. Power, motor, and control terminals remain within the outer housing boundaries. The front surface arranges the keypad, status display, and connection access clearly. Lateral cooling channels guide air along the power section, while the rear forms the mounting surface. Complete external dimensions are 100 × 368 × 219 mm. The published frame-size 1 weight converts to approx. 4.99 kg. The rectangular construction combines power section, control electronics, cooling, and operation in one enclosed basic unit. Front contour, connection areas, and housing depth belong to the concrete Control Techniques SP1403 configuration. Electrical values assign voltage, current, and motor power to the same type number. Control modes, serial communication, and external mechanical outline complete the technical profile of this Unidrive SP drive. The metric dimensions and weight cover the complete basic unit.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Control Techniques |
|---|---|
| Product range | Unidrive SP |
| Manufacturer / order / identification number | SP1403 |
| Mains voltage | 380 to 480 V AC ±10 % |
| Mains phases | three-phase input and output |
| Maximum continuous current | 4.2 A |
| Maximum peak current | 7.3 A |
| Typical motor power | 1.5 kW / 2 hp |
| Frame size | Frame Size 1 |
| Control modes | Open Loop, Closed Loop and Servo |
| Output frequency | 0 to 3000 Hz in Open Loop operation |
| Serial interface | 2-wire RS485 |
| Communication protocol | ANSI or Modbus RTU |
| Protection rating | IP20 / NEMA 1 |
| Cooling method | forced-air cooling |
| Dimensions | 100 × 368 × 219 mm (W × H × D) |
| Weight | approx. 4.99 kg |
Related products
Go to shop 
Control Techniques SP3401
€1,470.00
Control Techniques UNI1404
€1,340.00
Control Techniques UNI2403
€1,090.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Control Techniques SP1403?
Complete external dimensions are 100 × 368 × 219 mm, and converted weight is approx. 4.99 kg.
What current and power ratings does Control Techniques SP1403 have?
The drive provides 4.2 A continuous current, 7.3 A peak current, and 1.5 kW / 2 hp typical motor power.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.