International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
For high-torque axes, the FANUC A06B-0153-B175 is specified as an α30/3000 AC servo motor. The model delivers 4.8 kW rated output at 3000 min⁻¹. Its stall torque is 30 Nm. The complete order code uniquely identifies this version with a straight shaft, a 35-Nm brake and an αA64 pulse coder. At standstill, the FANUC data table specifies a continuous current of 33.7 A RMS and a rotor inertia of 0.017 kg·m². The torque constant is 0.89 Nm/A and the back-EMF constant is 31 V per 1000 min⁻¹. An armature resistance of 0.046 Ω is documented. These values support electrical and dynamic comparison with the existing drive controller. FANUC also lists a mechanical time constant of 0.003 seconds and a thermal time constant of 70 minutes. The maximum theoretical acceleration is 12000 rad/s², while the maximum theoretical torque is 200 Nm. The exact product record additionally specifies 168 V, 200 Hz and a nameplate current of 17 A; for shipping from Germany to the United States and other international destinations, the specific order for A06B-0153-B175 remains clearly assigned. The brake version has a square flange measuring 174 × 174 mm. The axial length from the mounting face to the rear end of the motor is 460 mm, with an additional shaft projection of 79 mm. This results in a structured overall length of 539 mm. The distance from the mounting face to the shaft shoulder is 386 mm, and the associated drawing dimension C is 49 mm. The net weight is 41 kg. For replacement matching, the complete A06B-0153-B175 identifier, brake, pulse coder and mechanical interface must therefore correspond.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | FANUC |
|---|---|
| Product range | FANUC AC Servo Motor α series |
| Manufacturer/order/identification number | A06B-0153-B175 |
| Device type | AC servo motor |
| Motor model | α30/3000 |
| Rated output | 4.8 kW |
| Rated speed | 3000 min⁻¹ |
| Stall torque | 30 Nm |
| Continuous stall current | 33.7 A RMS |
| Maximum theoretical torque | 200 Nm |
| Maximum theoretical acceleration | 12000 rad/s² |
| Rotor inertia | 0.017 kg·m² |
| Torque constant | 0.89 Nm/A |
| Back-EMF constant | 31 V per 1000 min⁻¹ |
| Armature resistance | 0.046 Ω |
| Mechanical time constant | 0.003 s |
| Thermal time constant | 70 min |
| Version | Straight shaft, 35-Nm brake and αA64 pulse coder |
| Dimensions | 174 × 174 × 539 mm (flange W × H × overall length including shaft) |
| Weight | 41 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which version is identified by A06B-0153-B175?
The identifier denotes a FANUC α30/3000 AC servo motor with a straight shaft, 35-Nm brake and αA64 pulse coder.
What are the motor's rated output and rated speed?
The rated output is 4.8 kW and the rated speed is 3000 min⁻¹.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.