Lenze MCS14L32-RS0B0-A24N-ST5S00N-R0SU
€540.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
FANUC A06B-6079-H208 is a two-axis Servo Amplifier Module from the Alpha Series. The complete order number identifies the SVM2-80/80 model with one L axis and one M axis. Type A without a fiber-optic connection is documented as the interface. Rated input power is 9.5 kW. The product data specify a range of 283–325 VDC for the DC supply, while maximum output voltage is listed as 230 VAC. Rated output current of 18.7 A is documented for both the L axis and the M axis. The current values for both channels therefore remain assigned to the same exact amplifier variant. FANUC series 16, 18 and 21 are listed for the CNC control assignment. The documented servo motor assignment starts with Alpha αi 22/2000. FANUC A06B-6079-H208 uses active cooling with an internal fan. The module is 380 mm high, 90 mm wide and 307 mm deep. Complete external dimensions are therefore 380 × 90 × 307 mm in height × width × depth order. Documented weight is approximately 6.6 kg. Dimensions and weight refer to the individual servo amplifier module without shipping packaging. Manufacturer, product range, complete order number, module type, axis count, interface, input power, input and output voltage, both axis currents, control and motor assignments, cooling, external dimensions and weight form the technical variant data set. The mechanical values are assigned to the H208 version in the FANUC manual documentation. The specification table records Dimensions and Weight as its final mandatory rows.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | Alpha Series |
| Manufacturer/order/identification number | A06B-6079-H208 |
| Number of axes | 2 (L-axis + M-axis) |
| Interface | Type A (non-fibre optic) |
| Rated input power | 9.5 kW |
| Input voltage | 283–325 VDC |
| Maximum output voltage | 230 VAC |
| Rated output current L-axis | 18.7 A |
| Rated output current M-axis | 18.7 A |
| CNC controller assignment | Fanuc 16, 18, 21 Series |
| Servo motor assignment | Alpha αi 22/2000 and higher |
| Cooling method | Active cooling (internal fan) |
| Dimensions | 380 × 90 × 307 mm (H × W × D) |
| Weight | Approx. 6.6 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of FANUC A06B-6079-H208?
Complete external dimensions are 380 × 90 × 307 mm in height × width × depth order.
How much does FANUC A06B-6079-H208 weigh?
The documented weight is approximately 6.6 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.