Fanuc A06B-6057-H001
€860.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The FSSB interface connects the FANUC A06B-6127-H104 to the CNC. As a single-axis servo amplifier module, it controls one servo motor in the modular Alpha i drive system. Its model designation is αi SV 40HV; the HV identifier assigns it to the 400-V series. This version supports HRV2 and HRV3 for control. Power supply and axis control are assigned to separate assemblies in the system. The separate αi-PS module supplies the common DC link to which the servo amplifier is connected. The mains connection is therefore located at the supply unit. The FSSB connection to the CNC and the electrical power path each perform separate functions within this arrangement. An internal fan moves air through the amplifier enclosure; the external heat sink projects from the rear. An additional external fan is not part of the cooling for this design. The internal fan can be removed upwards. A free maintenance space above the module is required for airflow and fan replacement. For the specific order, shipping from Germany to the United States and other international destinations refers exactly to this single-axis A06B-6127-H104 version with an external heat sink. The SV 40HV current stage has a rated output current of 9.1 A RMS and a nominal peak-current limit of 40 A. These figures distinguish the effective rated-current value from the peak value of the current limit. The narrow module is mounted at its upper and lower mounting points. Two M5 threads with a vertical spacing of 360 mm are provided for mounting. At a width of 60 mm and an overall height of 380 mm, the depth including the external heat sink is 272 mm. Net weight is 3.9 kg.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | Alpha i Series |
| Manufacturer/order/identification number | A06B-6127-H104 |
| Device type | Servo amplifier module |
| Model designation | αi SV 40HV |
| Number of axes | 1 |
| Voltage series | 400-V series |
| CNC interface | FSSB |
| Power supply | DC link via separate αi-PS supply module |
| Rated output current | 9.1 A RMS |
| Nominal current limit | 40 A peak |
| Control method | HRV2 and HRV3 |
| Cooling type | Internal fan and external heat sink; no external fan |
| Mounting | 2 × M5, vertical hole spacing 360 mm |
| Dimensions | 60 × 380 × 272 mm (W × H × D) |
| Weight | 3.9 kg |
Related products
Go to shop 
Fanuc A06B-6057-H007
Price on request
Fanuc A06B-6058-H007
€590.00
Fanuc A06B-6066-H006
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which interface connects A06B-6127-H104 to the CNC?
The connection to the CNC uses FSSB. The αi SV 40HV module controls a single servo motor axis.
Which cooling does this version have?
A06B-6127-H104 has an internal fan and an external heat sink. An external fan is not provided for this design.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.