Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Fanuc A06B-6140-H015 is the αi PS 15 power supply module in the Alpha i amplifier series. It forms the common DC link within the series architecture used in CNC and machine-tool systems. This version belongs to the 200-V input series and uses power regeneration. Fanuc specifies a three-phase 200 to 240 VAC main-circuit input at 50/60 Hz; the control supply is also 200 to 240 VAC but single-phase. Power supply capacity is 22 kVA and nominal output capacity is 17.5 kW. The motor-selection table lists 15 kW rated output, 34 kW maximum output and 51 kW peak maximum output capability. The module uses outline drawing 3, with a width of 90 mm, height of 380 mm and depth of 172 mm. An internal circulating fan and an external heat-sink fan provide cooling. At 15 kW rated output, Fanuc documents total heat dissipation of 333 W and residual cabinet heat of 61 W. The specified AC reactor is A81L-0001-0156. The main power connection for the αi PS 15 is specified for at least 14 mm² or AWG 4; the manual gives a tightening torque of 1.1 to 1.5 Nm for the M4 terminals. Further interfaces include DC-link terminal block TB1, main-power terminal block TB2, 200-V connectors CX1A and CX1B, and αi PS interface connector CXA2A. The item record identifies unit version A. The complete order number is A06B-6140-H015. Unit version, amplifier modules, supply voltage, AC reactor and connector assignment are separate properties of each machine configuration. The module has a 90 mm wide cabinet-mounting construction with an external heat sink. Fanuc manual B-65282EN describes the electrical connections, installation dimensions and maintenance areas for this amplifier series.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Fanuc |
|---|---|
| Product series | Alpha i / αi PS |
| Manufacturer/order/identification number | A06B-6140-H015 |
| Device type | Power supply module |
| Model | αi PS 15 |
| Control method | Power regeneration |
| Main-circuit input | 200–240 VAC, 3-phase, 50/60 Hz |
| Control supply | 200–240 VAC, 1-phase, 50/60 Hz |
| Power supply capacity | 22 kVA |
| Nominal output capacity | 17.5 kW |
| Rated output for motor selection | 15 kW |
| Maximum output for motor selection | 34 kW |
| Peak output for motor selection | 51 kW |
| Total heat dissipation | 333 W at 15 kW |
| Residual heat in cabinet | 61 W at 15 kW |
| Cooling | Internal circulating fan and external heat-sink fan |
| Associated AC reactor | A81L-0001-0156 |
| Dimensions | 90 × 380 × 172 mm (W × H × D) |
| Weight | approx. 8 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What type of module is the Fanuc A06B-6140-H015?
Fanuc lists this order number as the Alpha i αi PS 15 power supply module in the three-phase 200 to 240-V series with power regeneration.
Which identifiers are recorded for this A06B-6140-H015?
The item record states the complete order number A06B-6140-H015 and unit version A. Fanuc identifies the model as αi PS 15.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.