Heidenhain 348 249-01
€540.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
For the series, Heidenhain documents protection class IP55 according to DIN 40050, an operating temperature range of 10 to 40 °C and a storage temperature of −20 to 50 °C. Documented identifiers and values: 251653-01; 43-; 26 mm; 10 mm; 3 m; 150; IP55; 40; 2.1 kg. The maximum scanning speed is 3 m/min. The weight with ISO-40 taper is approximately 2.1 kg. Heidenhain describes the TS 520 as a switching 3D touch probe system for NC-controlled milling machines and machining centers with a tool magazine and tool changer. The energy supply consists of four NiCd batteries, each with a nominal capacity of 150 mAh. The Heidenhain 251653-01 is listed in the specific inventory designation and an exact parts allocation as a TS-520 infrared touch probe with ISO-40 special version for MAHO. Before replacement, the complete ID 251653-01, TS-520 version, ISO-40 taper, MAHO assignment, stylus, infrared remote station and mechanical installation situation must match. The switching status and the charging status are transmitted via an infrared transmission window; a receiving window is used for activation by infrared pulses. The manual lists about eight hours of continuous use, or about a month of standby time.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | TS 500 / TS 520 |
| Manufacturer/order/identification number | 251653-01 |
| Version | TS 520 infrared, ISO 40 special version MAHO |
| Device type | Switching 3D touch probe system |
| System assignment | NC milling machines and machining centers with tool changers |
| Signal transmission | Infrared |
| Power supply and battery capacity | 4 NiCd batteries with 150 mAh each |
| Continuous operation | approx. 8 h |
| Standby | approx. 1 month |
| Centering function | Self-centering |
| Probe mechanism | Protective membrane |
| Lateral deflection | 26 mm with 43-millimetre stylus |
| Axial deflection travel | 10 mm |
| Maximum probing speed | 3 m/min |
| Degree of protection | IP55 according to DIN 40050 |
| Operating temperature | 10 to 40 °C |
| Storage temperature | −20 to 50 °C |
| Weight with ISO 40 | approx. 2.1 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Heidenhain 251653-01?
The full manufacturer and type number 251653-01 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.