Heidenhain 354005-04
€1,000.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Identification number 362294-01 denotes the separate Heidenhain AE LC 181 scanning unit. The bound stock record, exact product references and mounting instructions distinguish it from the complete LC-181 linear encoder with its scale housing. This unit uses the photoelectric DIADUR principle to scan a glass scale with seven tracks of different grating periods. EnDat 2.1 is documented as its synchronous serial data interface. Additional sinusoidal incremental signals are available at 1 VPP with a 16 µm signal period. The measuring step is 100 nm, while resolution is specified as 0.1 µm and finer. Electrical supply is 5 V DC with a tolerance of ±5 percent. The assigned operating-temperature range extends from 0 to +50 °C and the protection rating is IP53. The LC-181 dimensional drawing specifies a scanning-unit length of 88 mm in the direction of travel. Its associated cross-section records a height of 58.5 mm and a depth of 35 mm. The complete rigid housing envelope is therefore 88 × 58.5 × 35 mm in length × height × depth order. These dimensions refer to the separate scanning-unit housing; scale profile, connecting cable, connector and cable bend radius are outside the three values. No reliable exact mass was found for this identification number, so product weight is shown conservatively and visibly as an estimate of approx. 0.3 kg.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | LC 181 |
| Manufacturer / order / identification number | 362294-01 |
| Product type | Scanning unit (AE) |
| Measuring principle | Absolute, photoelectric (DIADUR) |
| Measuring standard | DIADUR glass scale with 7 tracks of different grating periods |
| Signal period | 16 µm |
| Measuring step | 100 nm |
| Resolution | 0.1 µm and finer |
| Data interface | EnDat 2.1 (synchronous serial) |
| Incremental output signals | 1 Vpp (sine signals) |
| Supply voltage | 5 V ±5 % |
| Operating temperature | 0 °C to +50 °C |
| Protection rating | IP 53 |
| Dimensions | 88 × 58.5 × 35 mm (L × H × D; rigid housing of the separate scanning unit) |
| Weight | approx. 0.3 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 362294-01?
The rigid housing of the separate scanning unit measures 88 × 58.5 × 35 mm in length × height × depth order. Product-specific estimated weight is approx. 0.3 kg.
Which measuring signals are documented for Heidenhain 362294-01?
The recorded data include EnDat 2.1, additional sinusoidal 1 VPP signals, a 16 µm signal period, a 100 nm measuring step and a 5 V DC supply.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.