Lenze E70ACMSE0104SA2ETR
€1,270.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Lenze E70ACMSE0484SA1ETR is a Single-Axis servo inverter from the i700 series. Its type designation assigns the device to the E70ACMSE0484xx1xxx standard installation design. The Lenze catalogue specifies 11 kW rated power for the associated current class. At 4 kHz, the hardware manual lists 24.0 A continuous output current and 48.0 A maximum current. These figures correct the older values of 4.8 kW, 24.2 A and 48.4 A. DC supply is specified as DC 260-775 V. Axis configuration is single-axis. EtherCAT provides communication. Resolver/Encoder is listed for motor feedback; motor-temperature monitoring and integrated holding-brake control are also documented. Safe Torque Off (STO) is the safety function. Two digital inputs are available for signal processing. Installation is control-cabinet mounting and cooling is natural convection. The Lenze hardware manual places E70ACMSE0484xx1xxx in the 100-mm width class, not the previously stated 50-mm class. The table specifies 350 mm height, 100 mm width and 261 mm depth. Complete external dimensions in canonical width × height × depth order are therefore 100 × 350 × 261 mm. Documented device weight is 5.2 kg. Dimensions and weight refer to the individual axis module without power supply module, cables or shipping packaging. Type number, rated power, current values, interfaces, installation and mechanical data distinguish E70ACMSE0484SA1ETR within the modular i700 system and its 700 drive platform. The specification table ends with Dimensions and Weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | i700 servo inverter |
| Manufacturer/order/identification number | E70ACMSE0484SA1ETR |
| Rated power | 11 kW |
| Maximum output current | 48.0 A |
| Continuous output current | 24.0 A |
| Input voltage | DC 260-775 V |
| Axis configuration | Single-axis |
| Communication | EtherCAT |
| Motor-temperature monitoring | Yes |
| Motor feedback | Resolver/Encoder |
| Safety function | Safe Torque Off (STO) |
| Holding-brake control | Integrated |
| Digital inputs | 2 |
| Installation | Control-cabinet mounting |
| Module width | 100 mm |
| Cooling method | Natural convection |
| Dimensions | 100 × 350 × 261 mm (W × H × D) |
| Weight | 5.2 kg |
Related products
Go to shop 
Lenze E70ACMSE0324SA1ETR
€2,350.00
Lenze E70ACMSE0204SA1ETR
€2,010.00
Lenze E70ACMSD0054VA1ETR
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the external dimensions of Lenze E70ACMSE0484SA1ETR?
Complete external dimensions are 100 × 350 × 261 mm in width × height × depth order.
How much does the i700 axis module weigh?
The Lenze hardware manual specifies a device weight of 5.2 kg for E70ACMSE0484xx1xxx.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.