Lenze 06I41-RS0B0-Z0B0-ST5S00N-R0SU
€330.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Resolver feedback and separate plug connections for power and feedback are features of this specific Lenze MCA 10I40-RS0B0-N14N-ST5S00N-R0SU configuration. The asynchronous servo motor from the MCA range has an RS0 resolver and is supplied without a brake. A cylindrical keyed shaft provides the mechanical connection. Its diameter is 14 mm and the stated shaft length is 30 mm. The B14C105 (FT85) mounting designation identifies the corresponding flange configuration; both the shaft geometry and the flange therefore need to be considered when matching it to an existing mechanical assembly. The electrical ratings are 390 V rated voltage and 2.4 A rated current. At a rated speed of 3950 min⁻¹, the rated torque is 2 Nm and the rated power is 0.8 kW. Further ratings are a frequency of 140 Hz and a power factor of 0.7. Together, these rated values describe the stated operating point. A quotation for this version without a brake takes the specific order into account, including shipping from Germany to the United States and other international destinations. The rotor moment of inertia is 2,436 kg·cm², providing another parameter for drive sizing. Electrical feedback uses the separate feedback plug connection, while the power connection also uses a plug. The housing is classified IP54 and the temperature class is F. The motor configuration includes self-ventilation and a KTY temperature sensor. Overall dimensions are estimated at approx. 110 × 140 × 300 mm, and weight at approx. 5 kg; both figures are estimates. The documented shaft dimensions of 14 × 30 mm remain the reference for checking the geometry.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product range | MCA |
| Manufacturer / order / identification number | MCA 10I40-RS0B0-N14N-ST5S00N-R0SU |
| Device type | Asynchronous servo motor |
| Rated power | 0.8 kW |
| Rated voltage | 390 V |
| Rated current | 2.4 A |
| Rated torque | 2 Nm |
| Rated speed | 3950 min⁻¹ |
| Rated frequency | 140 Hz |
| Power factor | 0.7 |
| Rotor moment of inertia | 2,436 kg·cm² |
| Protection rating | IP54 |
| Temperature class | F |
| Mounting arrangement | B14C105 (FT85) |
| Shaft | 14 × 30 mm, with key |
| Feedback | Resolver RS0 |
| Brake | Without brake |
| Dimensions | approx. 110 × 140 × 300 mm |
| Weight | approx. 5 kg |
Related products
Go to shop 
Lenze 09D41-RS0B0-B14N-ST5S00N-R0SU
€1,000.00
Lenze 09D41-SKMP1-B14N-ST5S00N-R0SU
€930.00
Lenze 10I40-RS0B0-Z0C0-ST5S00N-R0SU
€400.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What feedback and brake does this variant have?
The motor has an RS0 resolver and is configured without a brake. Power and feedback are connected through separate plug connections.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.