SEW-Eurodrive 31C370-503-4-07
€1,170.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The SEW-Eurodrive MDX60A0110-5A3-4-00 belongs to the MOVIDRIVE MD_60A series and is a frequency inverter used in industrial three-phase drive systems. Within the 400/500-V units, the 0110 designation identifies the power stage with 16.8 kVA apparent output power. At 400 V, the rated output current is 24 A and the corresponding rated mains current is 21.6 A. Under constant load, the manufacturer documentation specifies 11 kW as the recommended motor power. The mains-side rating is 3 × 380 to 500 V AC at 50 to 60 Hz. The output voltage can reach the respective mains voltage. In VFC operation, the PWM frequency can be set to 4, 8, 12, or 16 kHz. Internal current limitation can be parameterised from 0 to 150 percent. Motoring and regenerative operation are covered up to the documented current limit. The MDX60A0110 has size 2 and uses forced cooling with an airflow requirement of 80 m³/h. Maximum power loss in the 0110 stage is 400 W. SEW-Eurodrive documents an IP20 enclosure and an ambient temperature range from 0 to 50 °C under the stated rated conditions. The enclosure measures 130 × 336 × 325 mm and the unit weighs 6.6 kg. Mains input, motor output, DC link, and braking resistor are implemented as separate power connections. The standard version ends in -4-00, distinguishing it from technology versions with different suffixes. The full order number MDX60A0110-5A3-4-00 therefore provides the unambiguous assignment of voltage class, size, and version. In an existing MOVIDRIVE installation, these characteristics can also be compared using the nameplate, front marking, and connection layout.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | SEW-Eurodrive |
|---|---|
| Product series | MOVIDRIVE MD_60A |
| Manufacturer / order / identification number | MDX60A0110-5A3-4-00 |
| Device class | Frequency inverter |
| Size | 2 |
| Mains voltage | 3 × 380–500 V AC |
| Mains frequency | 50–60 Hz ±5 % |
| Rated mains current | 21.6 A at 3 × 400 V AC |
| Apparent output power | 16.8 kVA |
| Rated output current | 24 A at 3 × 400 V AC |
| Recommended motor power | 11 kW at constant load |
| PWM frequency | 4 / 8 / 12 / 16 kHz in VFC operation |
| Current limitation | 0–150 % adjustable |
| Enclosure | IP20 |
| Cooling | Forced cooling, 80 m³/h |
| Dimensions | 130 × 336 × 325 mm (W × H × D) |
| Weight | 6.6 kg |
Related products
Go to shop 
SEW-Eurodrive 31C450-503-4-00
€2,540.00
SEW-Eurodrive 8227241
€150.00
SEW-Eurodrive CMP50S/KY/RH1M/SM1
€910.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the electrical ratings of the MDX60A0110-5A3-4-00?
The 0110 version has a mains rating of 3 × 380 to 500 V AC at 50 to 60 Hz. At 400 V, SEW-Eurodrive specifies 16.8 kVA apparent output power, 24 A rated output current, and 11 kW recommended motor power at constant load.
What size is the SEW-Eurodrive MDX60A0110?
The inverter is a size 2 unit. The documented enclosure dimensions are 130 × 336 × 325 mm and the weight is 6.6 kg; sizes 1 to 3 of the MD_60A series have an IP20 enclosure.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.