SEW-Eurodrive 31C450-503-4-00
€2,530.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The -50 suffix identifies the IPOS version, for which SEW specifies part number 826 430 9. For the MKS51A015 version, the manufacturer documents 13.5 A rated input current, 15 A rated output current and 22.5 A maximum output current. Above this range, permitted output is reduced by 3 % per kelvin up to a maximum of 60 °C. Continuous operation is specified up to an installation altitude of 1,000 m without altitude-related reduction. Output voltage ranges from 0 V to the applied line voltage. An external 47 Ω braking resistor is provided for regenerative operation, with a peak braking power of 14 kW. The internal switched-mode power supply provides 29 W. SEW specifies an ambient temperature of 0 to 45 °C without output reduction. Documented identifiers and values: MKS51A015-503-50; 380 V; 10; 500 V; 10; 50/60; 15 A; 22.5 A; 29-W; 47-; 826; 430; 50/60; 13.5 A; 15 A; 22.5 A. At 130 × 336 × 325 mm and 6.5 kg, the mounting position must provide sufficient support and ventilation. The documented value for Dimensions is 130 × 336 × 325 mm. The documented value for Weight is 6.5 kg. Electronics are housed in an IP20 enclosure with forced cooling for stationary control-cabinet installation. The documented value for Degree of protection is IP20. The unit uses a three-phase supply of 380 V AC −10 % to 500 V AC +10 % at 50/60 Hz.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | SEW-Eurodrive |
|---|---|
| Product series | MOVIDYN MKS51A |
| Manufacturer / order / identification number | MKS51A015-503-50 |
| Device type | Compact servo inverter |
| Version | IPOS |
| Part number | 826 430 9 |
| Line voltage | 3 × 380 V AC −10 % to 500 V AC +10 % |
| Line frequency | 50/60 Hz ±5 % |
| Rated input current | 13.5 A AC |
| Rated output current | 15 A AC |
| Maximum output current | 22.5 A AC |
| Output voltage | 0 V to line voltage |
| External braking resistor | 47 Ω ±10 % |
| Peak braking power | 14 kW |
| Internal switched-mode power supply | 29 W |
| Cooling method | Forced cooling |
| Degree of protection | IP20 |
| Ambient temperature without reduction | 0 to 45 °C |
| Dimensions | 130 × 336 × 325 mm |
| Weight | 6.5 kg |
Related products
Go to shop 
SEW-Eurodrive MC07B0110-5A3-4-00
€660.00
SEW-Eurodrive MDF60A0150-503-4-00
€930.00
SEW-Eurodrive MKS51A010-503-50
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for SEW-Eurodrive MKS51A015-503-50?
The full manufacturer and type number MKS51A015-503-50 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.