Siemens 1FK7040-5AK71-1AH0
€1,500.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 1FK7083-5AF71-1AB0 is a permanent-magnet synchronous servomotor from the compact 1FK7 product series. The naturally cooled version operates at 3,000 min⁻¹ rated speed and delivers 10.5 Nm rated torque at a 100 K temperature rise. Rated current is 7.4 A. For standstill operation, the series table lists 13.3 Nm at 60 K and 16 Nm at 100 K; the motor has eight poles. Feedback is provided by an incremental sin/cos 1 Vpp encoder with 2,048 signal periods per revolution. The complete order number also identifies a shaft with keyway, an integrated holding brake and degree of protection IP64. Power and signal connections use rotatable angled connectors. The Siemens dimension drawing lists 268 mm from the flange mounting face to the rear for the braked 1FK7083-5 version with incremental encoder. Together with the 58 mm shaft extension, complete axial length is 326 mm. The square flange envelope measures 155 mm, while the connector assembly increases total external height to 197 mm. Complete external dimensions are therefore 326 × 155 × 197 mm in length × width × height order, including shaft and angled connectors. Documented motor weight for the braked version is 16.5 kg. These figures describe the complete envelope of this specific variant and support installation planning, storage, handling and transport. Mounting form, encoder, shaft, brake and protection remain defined by the full order code; adjacent suffix codes can differ mechanically.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | 1FK7 |
| Manufacturer/Order/Identification number | 1FK7083-5AF71-1AB0 |
| Device type | Synchronous servo motor |
| Motor principle | Permanent-magnet synchronous motor |
| Magnet material | Rare-earth magnets |
| Torque | 10.5 Nm |
| Current | 7.4 A |
| Speed | 3,000 min⁻¹ |
| Feedback | Incremental encoder, 2,048 signal periods/revolution |
| Protection rating | IP64 |
| Cooling | Self-cooled and unventilated |
| Temperature monitoring | KTY-84 sensor in the stator winding |
| Temperature class | Class F |
| Mounting arrangements | IM B5, IM V1 and IM V3 |
| Shaft end | Shaft with key and keyway |
| Vibration severity | Grade A |
| Holding brake | Integrated |
| Dimensions | 326 × 155 × 197 mm (L × W × H; including shaft and angled connectors) |
| Weight | 16.5 kg |
Related products
Go to shop 
Siemens 1FK7063-5AF71-1GG5
€2,010.00
Siemens 1FT6105-8AB71-1AB0
€2,850.00
Siemens 1FT6084-8AK71-3AA0
€3,430.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Siemens 1FK7083-5AF71-1AB0?
Complete external dimensions including shaft and angled connectors are 326 × 155 × 197 mm in length × width × height order.
How much does Siemens 1FK7083-5AF71-1AB0 weigh?
Documented weight for the version with integrated holding brake is 16.5 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.