Siemens 1FT5064-0AC01-2-Z
€150.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Within the 1FT5 series, Siemens assigns frame size 1FT5064 to its permanent-magnet AC servo motors. The AF71 winding operates with a 600 V DC link and has a rated speed of 3000 U/min. The planning guide lists 4.3 Nm rated torque at 100 K and 4.2 A rated current. Standstill torque is 5.5 Nm; documented maximum values are 4800 U/min and 22 Nm. The motor uses natural cooling and has IP64 protection. Construction is IM B5, with IM V1 and IM V3 also listed as mounting positions. A tachogenerator and rotor-position encoder form the feedback system. Power and signal connectors are separate. Frame size 63 and length 4 describe the mechanical base version. The available shortened identifier ends after the version digit and does not unambiguously establish the brake variant; weight therefore uses the higher catalogue value as a clearly marked conservative estimate. The Siemens dimension drawing states a 281 mm installation length and a 40 mm shaft extension, giving an overall external length of 321 mm. The flange area reaches 138 mm in width and the connector structure produces an overall height of 152.5 mm. Complete motor envelope is therefore 321 × 138 × 152.5 mm without connected cables. Further drawing values are 63 mm shaft height, 95 mm centering diameter and 19 mm shaft diameter. Siemens lists 8.5 kg without and 9.5 kg with a holding brake. Approx. 9.5 kg is therefore used for handling data.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | 1FT5 |
| Manufacturer / order / identification number | 1FT5064-0AF71-1 |
| Device type | AC servo motor |
| Motor function | Feed drive motor |
| DC-link voltage | 600 V DC |
| Standstill torque | 5.5 Nm at 100 K |
| Rated speed | 3000 U/min |
| Protection rating | IP64 |
| Cooling | Natural cooling |
| Feedback | Tachogenerator and rotor-position encoder |
| Frame size | 63 |
| Construction length | 4 |
| Mounting arrangement | IM B5, also IM V1 and IM V3 |
| Connection type | Power and signal connectors |
| Rated torque | 4.3 Nm (100 K) |
| Rated current | 4.2 A |
| Maximum speed | 4800 U/min |
| Dimensions | 321 × 138 × 152.5 mm (L × W × H; motor envelope including 40-mm shaft extension and connector structure, without cables) |
| Weight | approx. 9.5 kg (conservative; catalogue values 8.5 kg without / 9.5 kg with holding brake) |
Related products
Go to shop 
Siemens 1FT5062-0AC01-Z
€140.00
Siemens 1FT5046-0AH01-1
€270.00
Siemens 1FT5071-0AC01-Z
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Siemens 1FT5064-0AF71-1?
The complete motor envelope is 321 × 138 × 152.5 mm including the 40 mm shaft extension and connector structure.
What is the weight of Siemens 1FT5064-0AF71-1?
Weight is conservatively stated as approx. 9.5 kg; Siemens lists 8.5 kg without and 9.5 kg with a holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.