Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The variant code of Siemens 1PH7133-6EG00-0BB3 first establishes that no holding brake belongs to this motor version. The three-phase induction motor comes from the 1PH7 range and has a shaft height of 132 mm. Its rated point is 20 kW, 2,000 min⁻¹ and 96 Nm; the selection table additionally lists 45 A rated current and 350 V rated voltage. The field-weakening range begins at 4,000 min⁻¹, permissible continuous speed extends to 4,500 min⁻¹ and maximum speed is 8,000 min⁻¹. An EnDat absolute encoder with 2,048 pulses per revolution provides speed and position feedback. The cooling version has no attached external fan but a pipe connection on the non-drive end; the terminal box is on top, and the cable entry points right when viewed from the drive end. Mechanically, the motor has mounting type IM B3 with a keyed shaft and half-key balancing. Vibration severity grade S and shaft/flange accuracy R are coded for this version. Rotor moment of inertia is 0.076 kgm². The standard paint finish is anthracite RAL 7016. The enclosure corresponds to IP55, while a KTY84 sensor records the stator-winding temperature. The dimensional drawing specifies 658 mm overall length, 260 mm housing width, 275 mm overall height, a shaft height of 132 mm and a shaft measuring 42 mm in diameter and 110 mm in length. Motor mass is stated as approx. 90 kg.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | Siemens 1PH7 |
| Manufacturer/order/identification number | 1PH7133-6EG00-0BB3 |
| Motor type | Three-phase induction motor |
| Frame size | 1PH7133, shaft height 132 mm |
| Rated power | 20 kW |
| Rated speed | 2,000 min⁻¹ |
| Rated torque | 96 Nm |
| Rated current | 45 A |
| Rated voltage | 350 V |
| Field-weakening start speed | 4,000 min⁻¹ |
| Maximum continuous speed | 4,500 min⁻¹ |
| Maximum speed | 8,000 min⁻¹ |
| Encoder system | EnDat absolute encoder, 2,048 pulses/revolution |
| Cooling and connection | Without attached external fan; pipe connection on the non-drive end |
| Mounting type and shaft | IM B3; keyed shaft with half-key balancing |
| Holding brake and degree of protection | Without holding brake; motor enclosure IP55 |
| Temperature monitoring | KTY84 sensor in the stator winding |
| Dimensions | 658 × 260 × 275 mm (L × W × H); shaft Ø 42 × 110 mm; shaft height 132 mm |
| Weight | approx. 90 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What rated and speed data applies to Siemens 1PH7133-6EG00-0BB3?
The rated point is 20 kW, 2,000 min⁻¹ and 96 Nm. Further values are 45 A rated current, 350 V rated voltage and 8,000 min⁻¹ maximum speed.
Which encoder, cooling and brake version does 1PH7133-6EG00-0BB3 have?
The variant has an EnDat absolute encoder with 2,048 pulses per revolution and a pipe connection on the non-drive end without an attached external fan. A holding brake is not included in this variant code.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.