Siemens 6ES7 416-3FS06-0AB0
€1,130.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6AG1416-3ES06-7AB0 is based on module 6ES7 416-3ES06-0AB0 and has conformal coating. MPI/PROFIBUS DP, Ethernet/PROFINET and a slot for an IFM module are available for communication. The operating-temperature range extends from −25 to +70 °C. It is based on standard CPU 6ES7 416-3ES06-0AB0, supplemented by conformal coating and an extended operating-temperature range from −25 to +70 °C. The module addresses industrial environments with temperature, dust or material exposure beyond typical control-cabinet conditions. Integrated working memory totals 16 MByte and is divided equally into 8 MByte program memory and 8 MByte data memory. The first interface is MPI/PROFIBUS DP via X1 at up to 12 Mbit/s. The second interface X5 connects Industrial Ethernet and PROFINET. A matching IFM interface module can be added through the third slot IF1. The exact SIPLUS version belongs to firmware generation V6.0; the underlying CPU supports isochronous operation via PROFIBUS DP or PROFINET. Power is supplied through the S7-400 system power supply. The base module draws a typical 1.3 A and a maximum 1.5 A from the 5-V backplane bus; typical power loss is 6.5 W. This CPU is not approved for safety-related applications. A visually similar CPU 416F or a later V7 version is therefore not installed without checking the project configuration and approval. Communication paths, cycle behaviour and the existing STEP-7 project consequently remain traceable.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIPLUS S7-400 CPU 416 |
| Manufacturer/Order/Identification number | 6AG1416-3ES06-7AB0 |
| Device type | Central processing unit CPU 416-3 PN/DP |
| Technical basis | 6ES7 416-3ES06-0AB0 |
| Protective version | Conformal coating |
| Operating temperature | −25 to +70 °C |
| Total working memory | 16 MByte RAM |
| Program memory | 8 MByte |
| Data memory | 8 MByte |
| First interface | MPI/PROFIBUS DP, X1 |
| MPI/PROFIBUS DP transmission rate | Up to 12 Mbit/s |
| Second interface | Ethernet/PROFINET, X5 |
| Third interface | Slot for IFM module, IF1 |
| Firmware generation | V6.0 |
| Power supply | Via S7-400 system power supply |
| Current consumption from 5-V backplane bus | Typically 1.3 A; maximum 1.5 A |
| Power loss | Typically 6.5 W |
| Dimensions | 50 × 290 × 219 mm (W × H × D) |
| Weight | ca. 0.9 kg |
Related products
Go to shop 
Siemens 6ES7 416-2FK02-0AB0
€1,580.00
Siemens 6ES7414-5HM06-0AB0
Price on request
Siemens 6ES7 407-0KR00-0AA0
€230.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 6AG1416-3ES06-7AB0?
The SIPLUS central processing unit measures 50 × 290 × 219 mm in width × height × depth. The exactly assigned base module has a weight of ca. 0.9 kg.
What is the technical base of Siemens 6AG1416-3ES06-7AB0?
The SIPLUS version is assigned to CPU 416-3 PN/DP with base order number 6ES7 416-3ES06-0AB0 and adds conformal coating plus the extended temperature range.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.