Siemens 6ES7414-3XJ04-0AB0
€630.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The process image provides 128 Byte for inputs and 128 Byte for outputs. Program logic can use 4,096 flags, 256 counters, and 256 timers. The MPI interface operates at 187.5 kBaud and supports up to 32 nodes without a repeater or up to 127 nodes with a repeater. PROFIBUS DP supports 9.6 kBaud to 3 Mbaud; Siemens specifies up to 32 DP nodes and up to eight online connections. The CPU provides eight operating-hours counters, 4 KByte of local data, and a nesting depth of 16 for each program processing level. For replacement, the complete MLFB, existing STEP-7 hardware configuration, Memory Card, MPI/PROFIBUS topology, and firmware basis must be considered together. The variants 6ES7 413-2XG01-0AB0 and 6ES7 413-2XG02-0AB0 are separate successors and must not be equated solely because they are also designated CPU 413-2. It is supplied through the S7-400 backplane bus at 5 V DC; typical current consumption is 2.7 A and the maximum is 3.0 A. Documented identifiers and values: 6ES7; 413-2XG00-0AB0; 16.384; 1.024; 5 V; S7-400; 50; 290; 219 mm; 1.07 kg. The digital I/O address area covers 16,384 inputs and outputs, while the analog area covers 1,024 channels. Measuring 50 x 290 x 219 mm and weighing approximately 1.07 kg, the CPU occupies the double S7-400 module width typical of this generation. Maximum power loss is 15 W. A Memory Card expands the load memory up to 15 MByte. Siemens 6ES7 413-2XG00-0AB0 is a CPU 413-2 DP central processing unit from the classic SIMATIC-S7-400 range. Siemens specifies 72 KByte of integrated working memory and 4 KByte of integrated load memory.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC S7-400 |
| Manufacturer/order/identification number | 6ES7 413-2XG00-0AB0 |
| Device type | CPU 413-2 DP central processing unit |
| Working memory | 72 KByte integrated |
| Load memory | 4 KByte integrated; expandable up to 15 MByte using a Memory Card |
| Digital I/O address area | 16,384 inputs and outputs |
| Analog I/O address area | 1,024 inputs and outputs |
| Process image | 128 Byte inputs and 128 Byte outputs |
| Flags | 4,096 flags, M 0.0 to M 511.7 |
| Timers and counters | 256 timers and 256 counters |
| MPI interface | 187.5 kBaud; maximum 32 nodes without a repeater and 127 with a repeater |
| PROFIBUS DP interface | 9.6 kBaud to 3 Mbaud; maximum 32 nodes |
| Online connections | maximum 16 via MPI/K-bus and maximum 8 via PROFIBUS DP |
| Local data | 4 KByte in total |
| Operating-hours counters | 8 |
| Supply and current consumption | 5 V DC via S7-400 bus; typically 2.7 A, maximum 3.0 A |
| Power loss | maximum 15 W |
| Dimensions | 50 x 290 x 219 mm |
| Weight | approx. 1.07 kg |
Related products
Go to shop 
Siemens 6ES7416-2XK04-0AB0
€410.00
Siemens 6ES7 416-2FK02-0AB0
€1,580.00
Siemens 6ES7 405-0KA00-0AA0
€130.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7 413-2XG00-0AB0?
The full manufacturer and type number 6ES7 413-2XG00-0AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.