Siemens 6ES7 405-0RA02-0AA0
€570.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
At 50 × 290 × 217 mm and approx. 1.4 kg, the module has the typical S7-400 form factor for a 10-A power supply. These details distinguish the unit from later PS-405 versions with a wider input-voltage range or redundancy function. It connects to a 24-V-DC supply and generates 5.1 V DC for the backplane bus and 24-V DC for additional loads on the secondary side. The permissible static input-voltage range is 19.2 to 30 V DC; the dynamic range is 18.5 to 30.2 V DC. Siemens specifies rated input current of 4.5 A and an inrush-current peak of 44 A with a half-value width of 20 ms. Two optional lithium AA batteries, each rated at 3.6 V and 1.9 Ah, can support backup operation. Documented identifiers and values: 6ES7; 405-0KA00-0AA0; 5.1 V; 10 A; 24 V; 1 A; 108 W; 33 W; 50; 290; 217 mm; 1.4 kg. Maximum residual ripple is 50 mV at the 5-V output and 200 mV at the 24-V output. The documented value for Rated input voltage is 24 V DC. The documented product data also list 200. The 24-V designation is documented. The two documented output currents are 10 A and 1 A. The module bridges power interruptions for 4 to 5 ms and has power consumption of 108 W with 33 W power dissipation.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400 / PS 405 |
| Manufacturer/Order/Identification number | 6ES7 405-0KA00-0AA0 |
| Device type | PS 405 10A power-supply module |
| Rated input voltage | 24 V DC |
| Static input-voltage range | 19.2 to 30 V DC |
| Dynamic input-voltage range | 18.5 to 30.2 V DC |
| Rated input current | 4.5 A |
| Inrush current | Peak 44 A, half-value width 20 ms |
| Output voltages | 5.1 V DC and 24 V DC |
| Output currents | 10 A at 5 V DC and 1 A at 24 V DC |
| Maximum residual ripple | 50 mVpp at 5 V and 200 mVpp at 24 V |
| Maximum switching peaks | 150 mVs at 5 V and 500 mVs at 24 V |
| No-load conditions | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: 200; 24-V. |
| Connection | 3 × 1.5 mm²; cable diameter 3 to 9 mm |
| Power-failure buffering | 4 to 5 ms |
| Power data | Power consumption 108 W, power dissipation 33 W |
| Backup batteries | Optional 2 × lithium AA, 3.6 V / 1.9 Ah |
| Dimensions | 50 × 290 × 217 mm (W × H × D) |
| Weight | approx. 1.4 kg |
Related products
Go to shop 
Siemens 6ES7 407-0KR00-0AA0
€230.00
Siemens 6ES7400-1JA01-0AA0
€850.00
Siemens 6ES7 400-1JA00-0AA0
€100.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which input voltage is documented?
The rated input voltage is 24 V DC.
Which output currents does the module provide?
The documented values are 10 A at 5 V DC and 1 A at 24 V DC.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.