Siemens 6ES7421-7BH01-0AB0
€300.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list STEP-7. Documented identifiers and values: 6ES7; 432-1HF00-0AB0; 10 V; 20; 13; 24 V; 25; 290; 210 mm; 9 W; 650 g. Each channel can be configured individually for a voltage or current signal, including voltage ranges such as 0 up to 10 V and ±10 V as well as current ranges such as 4 up to 20 mA. For spare-parts matching, Siemens 6ES7 432-1HF00-0AB0 should also be checked against the installed S7-400 project. Further technical data include typical power dissipation of 9 W, a shielded cable length of up to 200 m and 13-bit resolution with defined conversion times and output-load limits. Siemens 6ES7 432-1HF00-0AB0 is an SM 432 analog output module for the SIMATIC-S7-400 family. The documented dimensions of 25 x 290 x 210 mm and weight of approx. 650 g support comparison with the installed rack and control-cabinet documentation. For service work, it is important that the electronics and nominal load voltage use 24 V DC, that the outputs are wired through L+/M and MANA, and that the analog section is isolated from the CPU and backplane bus. The Siemens module data manual identifies this version as AO 8 x 13 Bit with eight outputs.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400, SM 432 |
| Manufacturer/Order/Identification number | 6ES7 432-1HF00-0AB0 |
| Device type | SM 432 analog output module |
| Output channels | 8 analog outputs |
| Output type | Individually configurable as a voltage or current output |
| Resolution | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: 13. |
| Voltage outputs | 1 up to 5 V, 0 up to 10 V or ±10 V |
| Current outputs | 0 up to 20 mA, 4 up to 20 mA or ±20 mA |
| Power supply | Electronics and nominal load voltage L+: 24 V DC |
| Electrical isolation | Channels isolated from the backplane bus and load voltage; no isolation between channels |
| Line length | Maximum shielded length: 200 m |
| Power consumption | Max. 150 mA from the backplane bus; max. 400 mA from L+ at nominal load |
| Dissipation | Typically 9 W |
| Conversion time | 300 μs per channel; 420 μs in the 1 up to 5 V and 4 up to 20 mA ranges |
| Basic cycle time | 2.4 ms with all channels; 3.36 ms in the 1 up to 5 V and 4 up to 20 mA ranges |
| Dimensions | 25 x 290 x 210 mm |
| Weight | Approx. 650 g |
Related products
Go to shop 
Siemens 6ES7422-1BH11-0AA0
€100.00
Siemens 6ES7441-1AA04-0AE0
€190.00
Siemens 6ES7 431-1KF20-0AB0
€1,090.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7 432-1HF00-0AB0?
The full manufacturer and type number 6ES7 432-1HF00-0AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.