Siemens 6ES7 416-3XL04-0AB0
€990.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Documented identifiers and values: 6ES7; 441-1AA03-0AE0; IF-963; RS-232C; 20-; RS-422/485; 38; 3964; 25; 290; 210 mm; 720 g. Depending on the installed IF-963 interface module, the physical connection can be configured as RS 232C, 20 mA TTY or RS 422/485. Parameters are configured in STEP-7 through dedicated dialogs; the CP-441 parameter set V5.0 or later is documented for the AA03 version. On the S7-CPU memory card, each interface requires 1 to 5 kB for parameters and optionally up to 55 kB for message texts. Without an interface module, the unit draws a maximum of 700 mA from the 5-V backplane bus. It measures 25 mm wide, 290 mm high and 210 mm deep and weighs approx. 720 g, plus approx. 100 g for the interface module. With a 20 mA TTY interface, the integrated drivers support up to 19.2 kbit/s; RS 232 and RS 422/485 support up to 38.4 kbit/s. Siemens specifies up to eight connections in total and extended S7 communication. The documented product data also list IF-963. Siemens 6ES7 441-1AA03-0AE0 is a CP 441-1 communication processor for the SIMATIC S7-400 automation system. It adds a serial point-to-point connection to the S7-400 station through one configurable interface slot. The documented value for Integrated protocol drivers is 3964(R), ASCII and printer. Maximum transmission rate is 38.4 kbit/s.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400 / CP 441-1 |
| Manufacturer/Order/Identification number | 6ES7 441-1AA03-0AE0 |
| Device type | Communication processor for point-to-point connections |
| Communication channels | 1 channel, configurable |
| Interface modules | IF 963 for RS 232C, 20 mA TTY or RS 422/485 |
| Maximum transmission rate | 38.4 kbit/s |
| RS 232 transmission rate | Up to 38.4 kbit/s with 3964(R), ASCII or printer driver |
| RS 422/485 transmission rate | Up to 38.4 kbit/s with 3964(R), ASCII or printer driver |
| 20 mA TTY transmission rate | Up to 19.2 kbit/s with 3964(R), ASCII or printer driver |
| Integrated protocol drivers | 3964(R), ASCII and printer |
| Supported printers | HP DeskJet, HP LaserJet, IBM Proprinter and user-defined printers |
| Communication functions | Extended S7 communication |
| Number of connections | 8 in total |
| Engineering | STEP 7 with dedicated parameter dialogs; AA03 parameter set V5.0 or later |
| Memory required per interface | 1 to 5 kB for parameters; 0 to 55 kB for message texts |
| 5 V DC backplane-bus current | Maximum 700 mA without interface module |
| Dimensions | 25 x 290 x 210 mm |
| Weight | Approx. 720 g; interface module adds approx. 100 g |
| Module version | AA03, documented from product version 01 |
Related products
Go to shop 
Siemens 6ES7 416-3FS06-0AB0
€1,130.00
Siemens 6GK7 443-5FX02-0XE0
€60.00
Siemens 6ES7 463-2AA00-0AA0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7 441-1AA03-0AE0?
The full manufacturer and type number 6ES7 441-1AA03-0AE0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.