Siemens 6GK7 343-1CX10-0XE0
€250.00
The individual quotation states the shipping method and costs for the item and destination.
The Siemens 6GK1541-2BA00 is supplied through the ISA/AT slot with +5 V at a permissible tolerance of ±5 %. Current consumption of the CP 5412 (A2) communication processor is approximately 0.8 A. Within the SIMATIC NET family, this board provides the PROFIBUS connection for a programming device or PC. On the PC side, the card uses a 16-bit ISA/AT connector. PROFIBUS is connected through a 9-pin D-sub female connector, while supported transmission rates range from 9.6 kbit/s to 12 Mbit/s. An NEC PD 70236 in the V53A version serves as the microprocessor and is complemented by the ASPC2 communication ASIC. Local memory consists of 1 Mbyte DRAM and 64 Kbyte dual-port RAM, of which 16 Kbyte are available as a window. For the specific order, shipping from Germany can be arranged to the United States and other international destinations, referring precisely to this card variant. The open printed-circuit-board design has protection rating IP00 according to DIN 40050. The operating temperature range is 0 to +55 °C, while the storage range is -20 to +70 °C. Humidity class F according to DIN 40040 permits a maximum of 95 % relative humidity at 25 °C. The specified operating altitude is up to 3000 m above sea level. Mechanically, the card occupies one standard slot with an installation width of 15.24 mm. Board height and depth are 107 and 155 mm, corresponding to 15.24 × 107 × 155 mm in the public width, height and depth order. Net weight is 0.2 kg. Complete MLFB, CP-5412-(A2) designation, ISA/AT format and PROFIBUS connector jointly define the product binding.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC NET CP 5412 (A2) |
| Manufacturer/order/identification number | 6GK1541-2BA00 |
| Device type | Communication processor CP 5412 (A2) for PROFIBUS |
| PC interface | ISA/AT connector, 16 bit |
| PROFIBUS connection | 9-pin D-sub female connector |
| Transmission rate | 9.6 kbit/s to 12 Mbit/s |
| Microprocessor | NEC PD 70236 (V53A) |
| Communication ASIC | ASPC2 |
| Dynamic memory | 1 Mbyte DRAM |
| Dual-port RAM | 64 Kbyte, of which 16 Kbyte window |
| Power supply | +5 V, ±5 % |
| Current consumption | approx. 0.8 A at +5 V |
| Protection rating | IP00 according to DIN 40050 |
| Operating temperature | 0 to +55 °C |
| Storage temperature | -20 to +70 °C |
| Humidity class | F according to DIN 40040, maximum 95 % at 25 °C |
| Operating altitude | up to 3000 m above sea level during operation |
| Dimensions | 15.24 × 107 × 155 mm (W × H × D) |
| Weight | 0.2 kg net |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The CP 5412 (A2) uses a 16-bit ISA/AT connector on the PC side. PROFIBUS is connected through a 9-pin D-sub female connector at 9.6 kbit/s to 12 Mbit/s.
The card measures 15.24 × 107 × 155 mm, is supplied with +5 V at ±5 % and draws approximately 0.8 A. Net weight is 0.2 kg.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.