Siemens 6SE3214-0DA40
Price on request
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6SE6400-3CC00-4AB3 is a line reactor from the MICROMASTER 4 accessory range. The Siemens data sheet assigns the complete order number to a single-phase input voltage of 1 AC 200–240 V, rated current of 3.4 A and inductance of 9.5 mH. Power loss is 12.5 W at 50 Hz and 15 W at 60 Hz. Documented protection is IP20 and UL open type; the conformity designation is cURus. On the mains side, the reactor has a screw terminal for conductor cross-sections of 1.00–2.50 mm². On the load side, a 0.39 m connection cable with a cross-section of 1.50 mm² is documented. The PE connection uses an M5 threaded bolt. Mechanically, this is an FSA substructure component. The Siemens data sheet states complete external dimensions of 75.5 × 200 × 50 mm in width, height and depth order and a net weight of 1.3 kg. Dimensions and weight apply to the individual component without shipping packaging or external connection components. Complete identifier, mains type, current, inductance, frequency values, connection technology and construction belong together for product assignment. An output reactor or a line reactor in another current class does not automatically share these data. Previous specific replacement and planning guidance is omitted in favor of a technical product presentation. Conformity remains the final technical row before the mechanical core data. Complete external dimensions followed by exact weight form the mandatory final two rows, keeping the specification limited to Siemens 6SE6400-3CC00-4AB3.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | MICROMASTER 4 |
| Manufacturer/order/identification number | 6SE6400-3CC00-4AB3 |
| Input voltage | 1 AC 200–240 V |
| Rated current | 3.4 A |
| inductance | 9.5 mH |
| Power loss | 12.5 W at 50 Hz; 15 W at 60 Hz |
| Protection class | IP20 / UL open type |
| Mains-side connection | Screw terminal, 1.00–2.50 mm² |
| Load-side connection | Connection cable, 1.50 mm², 0.39 m |
| PE connection | M5 threaded bolt |
| Design | FSA substructure component |
| Compliance | cURus |
| Dimensions | 75.5 × 200 × 50 mm (W × H × D) |
| Weight | 1.3 kg |
Related products
Go to shop 
Siemens 6SE6440-2AD23-0BA1
€340.00
Siemens 6SE6420-2UC22-2BA1
Price on request
Siemens 6SE6440-2UD23-0BA1
€570.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 6SE6400-3CC00-4AB3?
The Siemens data sheet states external dimensions of 75.5 × 200 × 50 mm in W × H × D order and a net weight of 1.3 kg.
Which electrical values are documented for Siemens 6SE6400-3CC00-4AB3?
Documented values are 1 AC 200–240 V, 3.4 A rated current, 9.5 mH, 12.5 W at 50 Hz and 15 W at 60 Hz.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.