Siemens 6SE7016-0TP50
€2,510.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Siemens 6SE7031-7EE85-1AA0 is a three-phase supply and regenerative unit from the SIMOVERT MASTERDRIVES series. Siemens lists the device as an air-cooled chassis unit with IP00 protection. Its documented mains connection is 3 AC 380–480 V at 50/60 Hz, with a rated current of 173 A. Within the drive system, the unit performs both line-side supply and regeneration of electrical energy. The manufacturer catalog specifies external dimensions of 270 × 1050 × 365 mm in width, height and depth order for the exact order number. The unit weight is listed as approximately 45 kg. These variant-specific manufacturer values replace the differing dimensions and higher weight figure previously stored. The mechanical data refers to the individual base unit, not shipping packaging, a pallet or additional cabinet components. The complete order number is decisive for spare-part identification because adjacent SIMOVERT MASTERDRIVES devices can have different current classes, frame sizes and connection configurations. The open IP00 chassis design belongs in a suitable cabinet with appropriate airflow, electrical connection positions and sufficient installation space. Width, height and depth define the required spatial assignment in the existing cabinet section, while the weight is relevant to transport and handling. Mains voltage, mains frequency, rated current, design and device function jointly describe the electrical and mechanical characteristics of this variant. Optional modules, communication boards and project-specific wiring are not included in the dimensional or weight data. The identity is limited exclusively to Siemens 6SE7031-7EE85-1AA0; differing suffixes and related power ratings require separate identification.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOVERT MASTERDRIVES |
| Manufacturer/order/identification number | 6SE7031-7EE85-1AA0 |
| Device type | Supply and regenerative unit |
| Design | Chassis unit |
| Degree of protection | IP00 |
| Mains connection | 3 AC 380–480 V |
| Mains frequency | 50/60 Hz |
| Rated current | 173 A |
| Device function | Regenerative supply / energy recovery |
| Cooling method | Air cooling |
| Dimensions | 270 × 1050 × 365 mm (W × H × D) |
| Weight | approx. 45 kg |
Related products
Go to shop 
Siemens 6SE7021-0EA51
€1,840.00
Siemens 6SE7021-0EA51-Z
Price on request
Siemens 6SE7021-0TA61-Z
€1,410.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of the Siemens 6SE7031-7EE85-1AA0?
The Siemens catalog specifies external dimensions of 270 × 1050 × 365 mm and an approximate weight of 45 kg.
What are the electrical ratings of the Siemens 6SE7031-7EE85-1AA0?
The documented ratings are 3 AC 380–480 V, 50/60 Hz, 173 A rated current, chassis design and IP00 protection.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.