Siemens 6SC6112-2VA01
€2,130.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
On the line side of a SIMODRIVE-611 drive group, Siemens 6SN1111-0AA01-0BA2 filters conducted interference. The unit is configured as a filter module in the 16/21 kW power class; its operating mode is squarewave current. Its three-phase configuration up to 480 V AC places it among the line-side system components of the modular converter range. The complete order number distinguishes this version from filters for other power classes or operating modes. Within the drive group, the filter is located ahead of the downstream line reactor and infeed components. Its function is to limit cable-borne interference generated by the converter to the EMC values specified for industrial environments. Siemens describes an attenuation range of 150 kHz to 30 MHz for SIMODRIVE-611 line filters. Integration requires the line and load sides to be assigned correctly; interchanging the connections can damage the unit. An installed line filter must be disconnected from the test setup for an AC high-voltage test. This version has degree of protection IP20 and is specified for ambient temperatures from 0 to 40 °C and up to 80 percent relative humidity without condensation. The documented operating conditions apply without altitude correction up to 1,000 m. Depending on the measurement reference, the enclosure is approximately 150 mm wide, 520 mm high and 290 mm deep; product weight is approximately 26 kg. The mechanical and electrical variant must therefore be considered precisely during system planning. For planning and replacement, 6SN1111-0AA01-0BA2, squarewave current operation and the 16/21 kW class remain the decisive variant characteristics.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | SIMODRIVE 611 |
| Manufacturer/order/identification number | 6SN1111-0AA01-0BA2 |
| Product designation | SIMODRIVE 611 filter module |
| Device type | Line-filter module |
| System function | Limitation of conducted converter interference |
| Power class | 16/21 kW |
| Operating mode | Squarewave current operation |
| Line type | Three-phase AC |
| Line voltage | up to 480 V AC |
| Filter range | 150 kHz to 30 MHz |
| Degree of protection | IP20 |
| Ambient temperature | 0 to 40 °C |
| Relative humidity | up to 80%, non-condensing |
| Installation altitude | up to 1,000 m without altitude correction |
| Dimensions | approx. 150 × 520 × 290 mm (W × H × D) |
| Weight | approx. 26 kg |
Related products
Go to shop 
Siemens 6SC6114-0AA00
Price on request
Siemens 6SN1118-0DH21-0AA1
Price on request
Siemens 6SN1118-0DK23-0AA1
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which power class applies to Siemens 6SN1111-0AA01-0BA2?
The filter module belongs to the SIMODRIVE-611 power class of 16/21 kW; its operating mode is squarewave current.
What function does the filter module perform in the SIMODRIVE-611 system?
It limits conducted interference from the converter system on the line side; the line and load connections must remain assigned correctly.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.