Siemens 6SN1123-1AA00-0HA1
€1,220.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The output stages for two motors are combined in the Siemens 6SN1123-1AB00-0HA1 in a 50 mm wide SIMODRIVE-611 power module. This version uses internal cooling and is connected to the motor cables via plug connectors. Both axes have a rated motor current of 3 A; the transistor limiting current is 8 A. The version-specific current data therefore clearly distinguish the complete order number from other power modules in the same series. The order number remains the central identification feature. At the regulated DC link, the input voltage is 600 or 625 V DC. With unregulated supply, the DC-link voltage is derived from the mains voltage using the factor 1.35; the maximum effective output voltage corresponds to the DC-link voltage divided by 1.4. The minimum permissible motor current is 0.6 A. For induction motors, the values are 3 A rated current, 3 A S6 current at a 40 percent duty cycle and 3 A peak current at a pulse frequency of 3.2 kHz. Synchronous motors are specified with 3 A rated current and 6 A peak current at 4 kHz. The derating factor is 55 percent in both cases. The power-loss values differ between motor types. For induction motors, 76 W in total are specified, including 28 W internal and 48 W external. For synchronous motors, the values are 70 W in total, 27 W internal and 43 W external. The efficiency is 0.98. The module measures approximately 480 × 50 × 300 mm and weighs approximately 7 kg. These mechanical data facilitate checking cabinet space and handling, while the order number, number of axes, cooling type and current values ensure factual identification of the existing installation.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMODRIVE 611 |
| Manufacturer/order/identification number | 6SN1123-1AB00-0HA1 |
| Device type | Power module |
| Number of axes | 2 |
| Cooling | internal |
| Regulated DC-link supply | 600 / 625 V DC |
| Rated motor current per axis | 3 A |
| Transistor limiting current | 8 A |
| Minimum motor current | 0.6 A |
| Induction motor pulse frequency | 3.2 kHz |
| Synchronous motor pulse frequency | 4 kHz |
| Synchronous motor peak current | 6 A |
| Derating factor | 55 % |
| Induction motor power loss | 76 W total / 28 W internal / 48 W external |
| Synchronous motor power loss | 70 W total / 27 W internal / 43 W external |
| Motor connection | Plug connector |
| Dimensions | approx. 480 × 50 × 300 mm |
| Weight | approx. 7 kg |
Related products
Go to shop 
Siemens 6SN1123-1AB00-0CA1
€550.00
Siemens 6SN1118-1NH01-0AA0
€250.00
Siemens 6SN1123-1AA00-0CA2
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which current values apply to the Siemens 6SN1123-1AB00-0HA1?
Each axis has a rated motor current of 3 A; in addition, there is an 8 A transistor limiting current and a minimum motor current of 0.6 A.
How is the SIMODRIVE-611 power module cooled?
The 6SN1123-1AB00-0HA1 version has internal cooling; the documented module width is 50 mm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.