ABB AI930B
€670.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
ABB DSQC653 is a digital I/O module with relay outputs for robot controllers on the IRC5 platform. The complete ABB order number is 3HAC025918-001/00. Eight digital inputs acquire 24-V-DC signals, while eight single-pole normally open relays switch external loads. Input logic ranges are stated as 15–35 V DC and −35–5 V DC. Typical input current is ca. 5 mA at rated voltage. Relay outputs are rated for 24 V DC or 120 V AC RMS and 2 A per channel; minimum load is 2.5 VA per channel. Typical switching times are 6 ms for closing and 7 ms for opening. Connection to the controller uses DeviceNet with automatic baud-rate detection. X1 carries relay outputs, X3 carries digital inputs, and X5 is the fieldbus connection. Mounting locations are the robot controller and an external I/O unit. The ABB product specification shows one common enclosure format for DSQC651, DSQC652 and DSQC653. Complete external dimensions for DSQC653 are 160 × 100 × 60 mm in height × width × depth order. The exact product record for DSQC653 and 3HAC025918-001/00 states a device weight of 0.40 kg. Dimensions and weight refer to the individual module without mating connectors, cables or additional mounting parts. Type designation, order number, channel assignment, signal levels, relay data, DeviceNet connection, connector designations, enclosure dimensions and weight uniquely identify this variant. The specification table summarizes the technical buyer data and concludes with Dimensions and Weight.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | ABB |
|---|---|
| Product series | DSQC / IRC5 |
| Manufacturer/order/identification number | DSQC653 |
| Device type | Distributed digital I/O module with relay outputs |
| Digital inputs | 8 |
| Relay outputs | 8, single-pole normally open contacts |
| Rated input voltage | 24 V DC |
| Logical-1 input range | 15–35 V DC |
| Logical-0 input range | −35–5 V DC |
| Typical input current | approx. 5 mA at rated voltage |
| ABB order number | 3HAC025918-001/00 |
| Input delay | typically 5 ms with default filtering |
| Rated output voltage | 24 V DC / 120 V AC RMS |
| Rated output current | 2 A per channel |
| Minimum output load | 2.5 VA per channel |
| Typical relay switching time | 6 ms closing / 7 ms opening |
| Supply voltage | 24 V DC |
| Fieldbus | DeviceNet with automatic baud-rate detection |
| Dimensions | 160 × 100 × 60 mm (H × W × D) |
| Weight | 0.40 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of ABB DSQC653?
Complete external dimensions are 160 × 100 × 60 mm in height × width × depth order.
How much does ABB DSQC653 weigh?
The documented device weight is 0.40 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.