Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The mechanical design of the Bosch Rexroth ADF104C-B05TB1-AS06-A2N1 is defined by size 104C, the B05 flange and a shaft with keyway. In the dimensional drawing for ADF104C, dimension m is 478.5 mm and the flange cross-section measures 215 × 215 mm. The shaft diameter is 38 mm, while the motor weighs 70 kg without a holding brake. Within the liquid-cooled ADF series, this configuration operates as an asynchronous motor with AS winding. Its ratings are 54 Nm rated torque, 2,700 min⁻¹ rated speed, 15.3 kW rated power and 44 A rated current. Continuous standstill values are specified as 60 Nm torque and 48 A current; maximum speed is 9,000 min⁻¹. The rotor has a moment of inertia of 0.025 kgm². Insulation class F is specified, and the permitted ambient temperature extends from 0 to 40 °C. At rated power loss, the cooling circuit requires a water flow of 4.5 l/min. Rated power loss is 3.2 kW. The permitted coolant inlet temperature ranges from 10 to 40 °C, and a maximum starting pressure of 3 bar is specified for the cooling circuit. The option code also identifies the interfaces and mechanical features of this exact motor. The power connection is located on top of the housing and exits toward side B. Code 6 denotes digital servo feedback; this configuration has no holding brake. The keyed shaft has no shaft sealing ring. Consequently, the motor body is rated IP65, while the shaft opening on side A is rated IP40. Standard deep-groove ball bearings support the rotor. Both coolant connections are located on side B of the motor housing.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | ADF |
| Manufacturer/order/identification number | ADF104C-B05TB1-AS06-A2N1 |
| Motor type | liquid-cooled asynchronous motor |
| Mounting design | B05 flange mounting |
| Rated torque | 54 Nm |
| Rated speed | 2,700 min⁻¹ |
| Rated power | 15.3 kW |
| Rated current | 44 A |
| Continuous standstill torque | 60 Nm |
| Maximum speed | 9,000 min⁻¹ |
| Motor feedback | digital servo feedback, code 6 |
| Holding brake | without holding brake, code 0 |
| Cooling | liquid cooling, connections on side B |
| Coolant flow rate | 4.5 l/min at rated power loss |
| Degree of protection | motor body IP65; shaft opening on side A IP40 |
| Output shaft | keyed shaft, Ø 38 mm, without shaft sealing ring |
| Power connection | top, cable exit toward side B |
| Dimensions | flange cross-section 215 × 215 mm; dimension m 478.5 mm |
| Weight | 70 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which ratings define the AS winding of this ADF104C configuration?
ADF104C with AS winding is rated at 54 Nm torque, 2,700 min⁻¹ speed, 15.3 kW power and 44 A current.
Which feedback and shaft options are fitted to ADF104C-B05TB1-AS06-A2N1?
Code 6 denotes digital servo feedback; code A denotes a keyed shaft without a shaft sealing ring.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.