Bosch Rexroth DDS02.2-W200-BE23-01-FW
€4,610.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Bosch Rexroth HDS02.2-W040-RE01 identifies a digital drive controller from the second DIAX04-HDS generation. The complete identification number denotes the 40 A base unit. Rated current and peak current are each 40 A, while continuous current is 20 A. Power dissipation at continuous current is 125 W. Control voltage is 26 V with ±2 percent tolerance. Control electronics consume 20 W without holding brake and control section. Maximum input current is 37 A. Maximum output voltage is 500 V and the output is three-phase. Maximum output frequency is 1,000 Hz. The base unit has IP10 protection. Storage and transport temperature ranges from −30 to +85 °C. The Bosch Rexroth guide assigns HDS02.2-W040 a height of 498 mm, width of 50 mm and depth of 308 mm. Complete external dimensions are therefore 498 × 50 × 308 mm in height × width × depth order. Minimum clearances of 300 mm above and 100 mm below are separate installation spaces and are not part of the external dimensions. Documented unit weight is 6.5 kg. Dimensions and weight refer to the individual base unit. Identifier, generation, current class, electrical limits, protection, temperature, dimensions and weight together identify this HDS02.2-W040-RE01 version.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | DIAX04 HDS, 2nd generation |
| Manufacturer/order/identification number | HDS02.2-W040-RE01 |
| Device type | Digital drive controller; base unit |
| Rated current | 40 A |
| Peak current | 40 A |
| Continuous current | 20 A |
| Power dissipation at continuous current | 125 W |
| Control voltage | 26 V ±2 % |
| Control-electronics power consumption | 20 W excluding holding brake and control section |
| Maximum input current | 37 A |
| Maximum output voltage | 500 V |
| Output phases | 3 |
| Maximum output frequency | 1,000 Hz |
| Protection rating | IP10 |
| Storage and transport temperature | −30 to +85 °C |
| Dimensions | 498 × 50 × 308 mm (H × W × D) |
| Weight | 6.5 kg |
Related products
Go to shop 
Bosch Rexroth DDS02.2-W200-BE24-02-FW
€4,610.00
Bosch Rexroth DDS02.2-W200-BE30-01-FW
€4,700.00
Bosch Rexroth DKR02.1-W200N-BE23-01-FW
€7,880.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Bosch Rexroth HDS02.2-W040-RE01?
Complete external dimensions are 498 × 50 × 308 mm in height × width × depth order.
How much does Bosch Rexroth HDS02.2-W040-RE01 weigh?
Documented unit weight is 6.5 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.