Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Bosch Rexroth HDS02.2-W040N-HS37-01-FW uses SERCOS for command communication. Its HS37-01 designation identifies the SERCOS variant, function ID 37 and function ID version 01; FW marks the separately specified firmware. Within the modular HDS range, the unit belongs to line 02, version 2 and the DIAX04 controller family. The configuration consists of the basic unit, command communication module, software module and additional plug-in modules. The HDS02.2-W040N basic unit has a rated current of 40 A and a peak current of 40 A. Continuous current is 20 A at 4 kHz or 15 A at 8 kHz, referring to the power-section switching frequency. Power dissipation at continuous current is 125 W, while signal processing in the basic unit draws 20 W from the ±26-V source. Cooling is provided by an integrated internal blower. Rated data apply from +5 to +45 °C and up to an installation elevation of 1,000 m; with reduced rated data, the maximum ambient temperature is +55 °C. The enclosure is classified as IP10 according to EN 60529 and insulation class C according to DIN VDE 0110. Cabinet dimensions are 498 × 50 × 265 mm. Minimum clearances are 80 mm above, 100 mm below and 90 mm at the front. The connection side includes DC bus and motor connections plus the modular configuration slots in the basic unit. The front contact guard is removable. Unit weight is 6.5 kg.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Bosch Rexroth |
|---|---|
| Product range | DIAX04 HDS |
| Manufacturer/order/identification number | HDS02.2-W040N-HS37-01-FW |
| Device type | Drive controller |
| Line / version | 02 / 2 |
| Command communication | SERCOS interface |
| Function ID / version | 37 / 01 |
| Cooling | Internal air cooling with integrated blower |
| Rated current | 40 A |
| Peak current | 40 A |
| Continuous current at 4 kHz | 20 A |
| Continuous current at 8 kHz | 15 A |
| Power dissipation at continuous current | 125 W |
| Signal processing power consumption | 20 W from ±26-V source |
| Ambient temperature at rated data | +5 to +45 °C |
| Maximum ambient temperature at reduced rated data | +55 °C |
| Installation elevation at rated data | max. 1,000 m above sea level |
| Degree of protection | IP10 according to EN 60529 |
| Dimensions | 498 × 50 × 265 mm (H × W × D) |
| Weight | 6.5 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which command communication interface does the Bosch Rexroth HDS02.2-W040N-HS37-01-FW use?
This variant uses a SERCOS interface. The HS37-01 designation contains function ID 37 and its version 01.
Which current ratings apply to the HDS02.2-W040N?
Rated current and peak current are both 40 A. Continuous current is 20 A at 4 kHz and 15 A at 8 kHz.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.