Bosch Rexroth MSK030B-0900-NN-M1-UG0-NNNN
€1,000.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list UG0. The documented product data also list 40 °C. Bosch Rexroth lists MSK motors with IP65 protection, B5/B35 mounting arrangements and an operating ambient temperature range of 0-40 °C. Documented dimensions include A 116 mm, B 226 mm, shaft diameter 24 mm and flange or centring dimensions of 130/156 mm. For MSK060C-0600, the catalogue lists a maximum speed of 6000 1/min, standstill torque of 9.5 Nm and maximum torque of 38 Nm. MSK060C-0600 identifies the frame size and winding. Documented identifiers and values: MSK060C-0600-NN-S1-UG0-NNNN; MSK060C; S1; 6000; 9.5 Nm; 38 Nm; IP65; 0-40; 8.4 kg; S1; 128; 240. The documented value for Maximum speed is 6000 1/min. The documented value for Degree of protection is IP65. The documented value for Standstill torque is 9.5 Nm. The documented value for Maximum torque is 38 Nm. These values make the motor relevant to dynamic handling, packaging and machine-tool axes, but the controller settings and load profile must match the exact winding and S1 feedback. The documented product data also list S1. The motor weighs 8.4 kg. The documented value for Weight is 8.4 kg.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | IndraDyn S MSK |
| Manufacturer/Order/Identification number | MSK060C-0600-NN-S1-UG0-NNNN |
| Device type | Permanent-magnet servomotor |
| Frame size | MSK060C |
| Winding | 0600 |
| Maximum speed | 6000 1/min |
| Standstill torque | 9.5 Nm |
| Maximum torque | 38 Nm |
| Encoder | S1 optical single-turn Hiperface encoder with 128 signal periods |
| Electrical connection | U connector, rotatable through 240 degrees |
| Shaft and brake | Smooth shaft with shaft sealing ring; without holding brake |
| Degree of protection | IP65 |
| Operating environment | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: 0-40. |
| Dimensions | A 116 mm, B 226 mm, C 50 mm, ØD 24 mm, ØE 130 mm, ØF 156 mm |
| Cooling | Natural convection |
| Weight | 8.4 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Bosch Rexroth MSK060C-0600-NN-S1-UG0-NNNN?
The full manufacturer and type number MSK060C-0600-NN-S1-UG0-NNNN is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.