Bosch Rexroth MSK030B-0900-NN-M1-UG0-NNNN
€1,000.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Bosch Rexroth MSK040C-0450-NN-M1-UP0-NNNN identifies a permanent-magnet synchronous servo motor from the IndraDyn S range. Its complete type code assigns it to the compact MSK040C size and winding variant 0450. Material number R911320614 identifies this exact standard version. Heat is dissipated by natural convection. An optical multiturn absolute encoder with Hiperface interface provides position and speed feedback. A rotatable connector routes the electrical connections from the motor housing. The output shaft is a keyed version with shaft seal. No holding brake is fitted to this variant. These features describe its specific mechanical and electrical equipment within the MSK040C family. The dimension drawing specifies an overall axial depth of 185.5 mm including the shaft. The square flange and housing profile is 82 mm wide. Including the upper connection area, maximum height is 124.5 mm. Complete external dimensions are therefore 124.5 × 82 × 185.5 mm in height × width × depth order. Documented weight of the version without a holding brake is 3.6 kg. Mating connector, cable bend, coupling and other attached machine parts are not included in these device dimensions. Exact identification is based on the complete type number, material number, size, winding, encoder, shaft form, seal, brake version and connector orientation. Adjacent MSK040C variants can use different windings, encoders, shafts or brakes despite the same basic size. The dimensions describe the motor space for installation, transport and storage; extra clearance around the connector and shaft is outside the device dimensions.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | IndraDyn S MSK |
| Manufacturer / order / identification number | MSK040C-0450-NN-M1-UP0-NNNN |
| Material number | R911320614 |
| Device type | Synchronous servo motor |
| Frame size | 040 |
| Length code | C |
| Winding code | 0450 |
| Cooling method | Natural convection |
| Encoder | Optical multiturn absolute encoder, Hiperface, 128 increments |
| Connector | Rotatable through 240° |
| Shaft | Keyway according to DIN 6885-1 with shaft sealing ring |
| Holding brake | None |
| Design | Standard |
| Maximum torque | 8.1 Nm |
| Standstill current at 100 K | 3.1 A |
| Winding inductance | 37.9 mH |
| Dimensions | 124.5 × 82 × 185.5 mm (H × W × D, including shaft) |
| Weight | 3.6 kg |
Related products
Go to shop 
Bosch Rexroth MSK060C-0600-NN-S1-UG0-NNNN
€790.00
Bosch Rexroth MSK070C-0150-NN-S1-UG1-NNNN
€2,930.00
Bosch Rexroth DKR02.1-W200N-BE23-01-FW
€7,880.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Bosch Rexroth MSK040C-0450-NN-M1-UP0-NNNN?
Complete external dimensions are 124.5 × 82 × 185.5 mm including the shaft.
How much does Bosch Rexroth MSK040C-0450-NN-M1-UP0-NNNN weigh?
Documented weight without a holding brake is 3.6 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.