Bosch Rexroth MSK060C-0600-NN-S1-UG0-NNNN
€790.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Bosch Rexroth MSK070C-0150-NN-S1-UG1-NNNN identifies a permanent-magnet synchronous servo motor from the IndraDyn S range. The complete type code assigns it to the MSK070C size and 0150 winding variant. Heat is dissipated by natural convection. A singleturn Hiperface encoder in the S1 version provides position feedback. The rotatable U connector routes electrical connections from the housing. Mechanically, the variant combines a plain shaft with shaft seal and an integrated holding brake. These features describe its specific electrical and mechanical equipment within the MSK070C family. The dimension drawing distinguishes between braked and unbraked motors. For this UG1 version with brake, overall axial depth including the shaft is 248 mm. The flange and housing profile is 140 mm wide. Including the upper connection area, maximum motor height is 202 mm. Complete external dimensions are therefore 202 × 140 × 248 mm in height × width × depth order. Documented total weight of the braked version is 13.2 kg. Mating connector, cable bend, coupling and other attached machine parts are not included in these device dimensions. Exact identification is based on the complete type number, size, winding, encoder, connector, shaft form, seal and brake version. Adjacent MSK070C variants can have different windings, encoders, shafts or brakes despite the same basic size. The dimensions describe the motor space for installation, transport and storage. Extra clearance around connector, shaft and coupling is outside the device dimensions and does not change the stated motor weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | IndraDyn S MSK |
| Manufacturer/Order/Identification number | MSK070C-0150-NN-S1-UG1-NNNN |
| Motor type | Permanent-magnet servomotor |
| Frame size | MSK070C |
| Winding | 0150 |
| Maximum speed | 2500 1/min |
| Standstill torque | 13 Nm |
| Maximum torque | 33 Nm |
| Standstill current | 4.1 A |
| Maximum current | 16.4 A |
| Moment of inertia | 0.00291 kgm² |
| Feedback | S1 single-turn Hiperface encoder |
| Connection and shaft | Rotatable U connector; smooth shaft with shaft sealing ring |
| Degree of protection | IP65 |
| Dimensions | 202 × 140 × 248 mm (H × W × D, including shaft) |
| Weight | 13.2 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Bosch Rexroth MSK070C-0150-NN-S1-UG1-NNNN?
Complete external dimensions are 202 × 140 × 248 mm including the shaft.
How much does Bosch Rexroth MSK070C-0150-NN-S1-UG1-NNNN weigh?
Documented weight of the braked version is 13.2 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.