Fanuc A06B-6079-H206
Price on request
Photo: used item 1 / 3 Shipping carriers
AC Spindle Motor P Series
€5,360.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
From a base speed of 575 min⁻¹ to a maximum speed of 6,000 min⁻¹ is the specified speed range of Fanuc A06B-0731-B234#3000. The complete designation assigns the AC spindle motor to the 40P/6000 model in the P Series. For this frame size, 18.5 kW continuous output, 22 kW 30-minute output and 307 Nm continuous torque are stated within the specified range. The 50-percent duty output is also stated as 22 kW. Rotor inertia is 0.29 N·m·s².
B234 is based on the foot-mounted B204 version with keyed shaft and rear air outlet; the digit sequence 34 identifies the built-in high-resolution magnetic pulse coder. The fully enclosed construction uses an external cooling fan. The permissible radial load for 30P and 40P is 550 kg. For mechanical classification, the foot-mounted version has a motor length of 448 mm plus a 170 mm fan section and a foot pattern of twice 160 mm. The encoder drawing specifies connection dimension A as 180 mm and B as 72 mm for 30P and 40P.
The shaft is horizontal or within a range from 45 degrees above to 90 degrees below horizontal. Insulation class F, grease lubrication, an ambient temperature of 0 to 40 °C, vibration grade V5 and a noise level of 75 dB(A) complete the specification. The model weighs 250 kg. The suffix #3000 remains part of the complete FANUC order designation.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC AC Spindle Motor P Series |
| Manufacturer/order/identification number | A06B-0731-B234#3000 |
| Device type | AC spindle motor |
| Motor model | 40P/6000 |
| Base speed | 575 min⁻¹ |
|---|---|
| Maximum speed | 6,000 min⁻¹ |
| Continuous torque | 307 Nm |
| Continuous output | 18.5 kW |
|---|---|
| 30-minute output | 22 kW |
| Encoder system | Built-in high-resolution magnetic pulse coder |
| Mounting type | Foot mounting |
|---|---|
| Cooling | Fully enclosed, external fan |
| Dimensions | Motor length 448 mm plus fan section 170 mm; foot pattern 2 × 160 mm; encoder dimensions A 180 mm and B 72 mm |
|---|---|
| Weight | 250 kg |
| Shaft | With key |
|---|---|
| Air outlet | Rear |
| Rotor inertia | 0.29 N·m·s² |
| Permissible radial load | 550 kg |
| Insulation class | F |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The 40P/6000 model has 18.5 kW continuous output, 22 kW 30-minute output, a base speed of 575 min⁻¹ and a maximum speed of 6,000 min⁻¹.
B234 identifies the foot-mounted version with keyed shaft and rear air outlet as well as the built-in high-resolution magnetic pulse coder.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.