Fanuc A06B-6057-H001
€860.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A06B-0829-B192 identifies a FANUC AC spindle motor from the αP series in the αP22/8000 version. Its continuous output is 11 kW; the series documentation specifies 15 kW for 30-minute duty and S3 60 %. The base speed is 750 U/min, while the high-speed version reaches 8000 U/min. Continuous-duty ratings are 70 A and 140 Nm. A current of 86 A is specified for the higher short-time load. The exact order number combines the αP22 model with flange mounting, a keyed shaft, rear exhaust and an integrated MZ sensor. This links the mechanical configuration and feedback system directly to the complete A06B identifier. The sensor has a resolution of 4096, with 256 teeth detected per revolution. The mounting arrangements for the high-speed version are IMB5 and IMV1. The motor enclosure is fully enclosed and fan-cooled. FANUC assigns the cooling method to design IC0A5. Insulation class H is specified, and the documented ambient temperature range is 0 to 40 °C. The table lists a weight of 143 kg and a rotor inertia of 0.128 kg·m² for the model. The common outline drawing for αP18/8000 and αP22/8000 shows an overall length of approximately 534 mm, a height of 266 mm and a housing width of 260 mm. Additional mechanical identification data are the flange contour, a shaft diameter of 55 mm and the 110 mm shaft section. The full A06B-0829-B192 identifier distinguishes this MZ-sensor version from other αP22 motors with different shafts, exhaust directions or detector configurations. All electrical and mechanical data refer to the αP22/8000 configuration described in the FANUC manual.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | FANUC |
|---|---|
| Product series | FANUC αP |
| Manufacturer/order/identification number | A06B-0829-B192 |
| Device type | AC spindle motor |
| Motor model | αP22/8000 |
| Continuous output | 11 kW |
| 30-minute/S3-60-% output | 15 kW |
| Base speed | 750 U/min |
| Maximum speed | 8000 U/min |
| Continuous torque | 140 Nm |
| Continuous current | 70 A |
| Rotor inertia | 0.128 kg·m² |
| Detector | Integrated MZ sensor |
| Mounting | Flange mounting, IMB5 or IMV1 |
| Shaft | Keyed shaft, Ø 55 mm |
| Cooling | Fully enclosed and fan-cooled, IC0A5 |
| Exhaust direction | Rear |
| Dimensions | 534 × 266 × 260 mm |
| Weight | 143 kg |
Related products
Go to shop 
Fanuc A06B-6079-H206
Price on request
Fanuc A06B-6058-H007
€590.00
Fanuc A06B-6058-H003
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which output and speed data apply to the Fanuc A06B-0829-B192?
The αP22/8000 version is specified with 11 kW continuous output, 15 kW for 30 minutes or S3 60 %, a base speed of 750 U/min and a maximum speed of 8000 U/min.
What mechanical configuration does the Fanuc A06B-0829-B192 have?
The order number denotes flange mounting, a keyed shaft, rear exhaust and an integrated MZ sensor. The external dimensions are 534 × 266 × 260 mm and the weight is 143 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.