Lenze E84ABBNE7514SN0
€400.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Order number Fanuc A06B-6058-H007 identifies a digital single-axis S Series servo amplifier. The input class is 200/230 V. Motor assignments for this version are 20S/3000, 30S/3000 and 40S/2000. The PWM controller board carries identifier A16B-1100-0300. Current diagnostics use a ratio of 32.5 A/V, while maximum amplifier current is 130 A Peak. This peak value is not a continuous rated output current. The separate discharge unit carries order number A06B-6058-H192 with 8 Ω resistance and 800 W capacity. These values describe the external discharge unit rather than amplifier power loss. The rectangular amplifier enclosure is 45 cm long, 16 cm wide and 19 cm high. Complete external dimensions are therefore 450 × 160 × 190 mm in length × width × height order. Device weight is 14 kg. Order number, single-axis construction, input class, motor assignments, board identifier, diagnostic ratio, peak current and discharge unit form the technical data set of the H007 version. Enclosure dimensions and weight refer to the individual amplifier module without shipping packaging. The complete dimensional entry replaces incomplete individual measurements and appears immediately before Weight in the specification table.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | FANUC |
|---|---|
| Product series | FANUC S Series AC Servo |
| Manufacturer/order/identification number | A06B-6058-H007 |
| Device type | Digital AC servo amplifier |
| Servo outputs | 1 axis |
| Input voltage class | 200/230 V |
| Motor connection/assignment 1 | FANUC 20S/3000 |
| Motor connection/assignment 2 | FANUC 30S/3000 |
| Motor connection/assignment 3 | FANUC 40S/2000 |
| PWM interface/controller board | A16B-1100-0300 |
| Current/test voltage ratio | 32.5 A/V |
| Maximum amplifier current | 130 A Peak |
| Braking energy connection / separate discharge unit | A06B-6058-H192 |
| Discharge resistance/capacity | 8 Ω / 800 W (separate unit) |
| Dimensions | 450 × 160 × 190 mm (L × W × H) |
| Weight | 14 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Fanuc A06B-6058-H007?
External dimensions are 450 × 160 × 190 mm in length × width × height order; weight is 14 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.