Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Multiple encoder paths define the Type 1 version of the FANUC A06B-6092-H245#500. The interface group receives signals from an M sensor, position encoder and magnetic encoder for orientation; MZ and BZ sensors for built-in motors are also listed. This spindle amplifier module belongs to the FANUC Alpha series and carries the model designation SPM-45HV. Its electrical configuration is assigned to the 400-V high-voltage class. Two continuous motor power points are specified for operation with the corresponding spindle motors: 30 kW and 37 kW. At 30 kW, total power loss is 482 W; at 37 kW, it is 588 W. With forced-air cooling, 52 and 57 W respectively remain as heat inside the control cabinet. The table assigns both thermal values separately to each power point: total power loss and residual heat in the cabinet. The enclosure measures 380 mm in height, 150 mm in width and 307 mm in depth. Its 150-mm enclosure width distinguishes this size from the 90-mm and 300-mm formats in the same SPM-HV table. Height and depth remain fixed at 380 and 307 mm respectively. These three dimensions describe the required installation space. Internal and external fans together with the external heat sink form the mechanical cooling arrangement. The front layout includes connector groups and a status display. A two-digit seven-segment display on the front indicates amplifier operating states. The complete order number A06B-6092-H245#500 identifies the specific version, so the suffix remains part of the visible identity. At approximately 11.3 kg, the module is one of the larger Alpha spindle amplifiers. Technical identification therefore considers the order number, SPM-45HV model, Type 1 interface, power point and installation dimensions together.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC Alpha Spindle Amplifier |
| Manufacturer/order/identification number | A06B-6092-H245#500 |
| Device type | Spindle amplifier module |
| Model | SPM-45HV |
| Voltage class | 400-V high-voltage series |
| Interface version | Type 1 (standard version) |
| Encoder interfaces | M, MZ and BZ sensor, position encoder and magnetic encoder |
| Continuous motor power | 30 kW or 37 kW |
| Total power loss | 482 W at 30 kW; 588 W at 37 kW |
| Residual heat in the control cabinet | 52 W at 30 kW; 57 W at 37 kW |
| Cooling | Forced-air cooling with internal and external fans |
| Status display | Two-digit seven-segment display |
| Dimensions | 380 × 150 × 307 mm (H × W × D) |
| Weight | approx. 11.3 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which motor power ratings are specified for the Fanuc A06B-6092-H245#500?
The SPM-45HV lists operating points with 30 kW and 37 kW of continuous motor power.
Which encoder signals does the Type 1 version process?
The Type 1 version processes M, MZ and BZ sensors as well as position and magnetic encoders.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.