Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Fanuc A06B-6130-H002 is a single-axis servo amplifier in the βi series and is identified in the FANUC manual as the βiSVM1-20i. Communication with the CNC uses the optical FSSB interface. For the main supply, FANUC specifies 200 to 240 V AC at 50 or 60 Hz for three-phase operation; a single-phase supply of 220 to 240 V AC is also documented. Rated input current is 8.0 A, rated output current is 6.8 A and maximum output current is 20 A. The control electronics additionally require 24 V DC at 0.9 A. The power stage uses sine-wave PWM control with transistor bridges and supports the FANUC HRV2 and HRV3 control methods. The documented output frequency range is 0 to 334 Hz. A dynamic brake circuit is integrated. Monitored conditions include overcurrent, IPM abnormality, DC-link overvoltage and undervoltage, discharge-resistor overheating, low control voltage, FSSB communication errors and a locked fan motor. For applications with additional regenerative energy, the manual lists separate 30-ohm regenerative resistors. The permitted operating ambient temperature is 0 to 55 °C. The dimensional drawing for the SVM1-4i and SVM1-20i gives 75 mm width, 150 mm height and 172 mm depth for the amplifier alone. Unit weight is 1.2 kg. The same product family also contains versions rated at 4 A, 20-A, 40 A and 80 A maximum output current. The complete order number, FSSB interface, supply data, current ratings and housing dimensions therefore define this specific variant.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC βi Servo Amplifier |
| Manufacturer / order / identification number | A06B-6130-H002 |
| Device type | Single-axis servo amplifier βiSVM1-20i |
| CNC interface | FSSB |
| Three-phase main supply | 200–240 V AC (+10/−15 %), 50/60 Hz |
| Single-phase main supply | 220–240 V AC (+10/−15 %), 50/60 Hz |
| Rated input current | 8.0 A |
| Rated output current | 6.8 A |
| Maximum output current | 20 A |
| Control supply | 24 V DC (+10/−10 %), 0.9 A |
| Control method | Sine-wave PWM with transistor bridges; HRV2 and HRV3 |
| Output frequency | 0–334 Hz |
| Dynamic brake circuit | Integrated |
| Operating temperature | 0–55 °C |
| Dimensions | 75 × 150 × 172 mm (W × H × D) |
| Weight | 1.2 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What supply does the Fanuc A06B-6130-H002 require?
The FANUC manual specifies 200 to 240 V AC for three-phase or 220 to 240 V AC for single-phase main supply, both at 50 or 60 Hz. The control circuit additionally requires 24 V DC.
What are the dimensions and interface of the A06B-6130-H002?
The βiSVM1-20i measures 75 × 150 × 172 mm, weighs 1.2 kg and communicates with the CNC through the optical FSSB interface.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.