Lenze E82EV152_4C201
€830.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Serially transmitted control signals are the central task of the Lenze E82ZAFFC001. The compact AS-i/S function module is part of the communication equipment for the 8200 drive series and is configured as coated variant 001. It operates according to AS-i specification 3.0 as a single slave in a tree topology. The bus can include up to 31 nodes; transmission runs at 167 kbit/s. With 31 nodes, the cycle time is 5 ms and the possible bus cable length is a maximum of 100 m. The four AS-i data bits D0 through D3 are assigned to digital controller inputs E1 through E4. In the opposite direction, the module maps the digital controller output and the drive's mains state. Two additional digital inputs, DI2 and DI3, return further binary signals. A green LED shows the state of bus communication, while a red LED indicates a communication fault. Connections are provided for AS-i, the two digital inputs and controller inhibit. Power is supplied from the AS-i bus. The specified minimum voltage is 18.5 V DC and maximum current consumption is 140 mA. The digital inputs detect LOW from 0 to 3 V DC and HIGH from 12 to 30 V DC. Climate class 3K3 applies during operation; pollution degree 2 follows IEC/EN 61800-5-1. The storage range is -25 to +60 °C. The IP20 enclosure measures 50 × 20 × 65 mm and weighs 0.06 kg.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Lenze |
|---|---|
| Product series | L-force Communication / 8200 |
| Manufacturer/order/identification number | E82ZAFFC001 |
| Device type | AS-i/S function module |
| Design | Variant 001, coated |
| Protocol | AS-i according to specification 3.0 |
| Network topology | Tree |
| Number of nodes | max. 31 |
| AS-i node | Single Slave |
| Slave profile | S-7.F, I/O code 7 |
| Transmission rate | 167 kbit/s |
| Bus cable length | max. 100 m |
| Cycle time | 5 ms with 31 nodes |
| Digital inputs | 2 × DI, input resistance 3.3 kΩ |
| Digital input signal levels | LOW 0 to 3 V DC; HIGH 12 to 30 V DC |
| Power supply | via AS-i bus, at least 18.5 V DC |
| Current consumption | max. 140 mA |
| Degree of protection | IP20 |
| Dimensions | 50 × 20 × 65 mm (W × H × D) |
| Weight | 0.06 kg |
Related products
Go to shop 
Lenze E82EV152K2C000
Price on request
Lenze E82EV152K2C200
€1,510.00
Lenze E82EV152K4B200
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which AS-i communication data applies to the Lenze E82ZAFFC001?
The function module operates according to AS-i specification 3.0 as a single slave in a tree topology. It supports up to 31 nodes, 167 kbit/s, a maximum bus cable length of 100 m and a cycle time of 5 ms with 31 nodes.
Which power supply and digital inputs does the E82ZAFFC001 have?
Power is supplied via the AS-i bus with at least 18.5 V DC and a maximum of 140 mA. Two digital inputs have an input resistance of 3.3 kΩ and distinguish LOW from 0 to 3 V DC and HIGH from 12 to 30 V DC.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.