Siemens 1FK6040-6AK71-1EG0
€1,680.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A rated output of 0.75 kW at 3000 U/min identifies the Siemens 1FK2204-5AF10-0SA0 as a servomotor in the SIMOTICS S-1FK2 CT series. Its standstill torque is 2.4 Nm. These torque and output figures describe different operating points: the standstill torque refers to the stationary motor shaft, while the rated output refers to the specified speed. The motor forms the rotating drive component within a converter-fed servo drive. The electrical configuration includes converter operation on a supply system with a maximum of 480 V. For this particular quotation, with shipping to the United States and other international destinations arranged for the specific order, the integrated holding brake and the position feedback configuration are especially relevant variant features. The holding brake is part of this type designation; the brake version is therefore already distinguished by the complete order number. Additional braking torque figures must be considered separately. Position feedback is provided by an AS22DQC absolute encoder with a singleturn resolution of 22 bit. Singleturn here means position detection within one motor revolution. The associated electrical interface is OCC. A rotatable M17 connector is located on the connection side. Connector size, interface and encoder designation each describe a separate part of the electrical configuration and therefore together help identify the motor. Mechanically, this variant has a cylindrical shaft end with a diameter of 19 mm and a length of 40 mm. These connection dimensions refer to the shaft, not to the external housing dimensions. The motor housing has an IP64 degree of protection. The net weight is 3.75 kg; the external dimensions in the specification are explicitly identified as approximate values.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S-1FK2 CT |
| Manufacturer / order / identification number | 1FK2204-5AF10-0SA0 |
| Device type | Servomotor |
| Standstill torque | 2.4 Nm |
| Rated output | 0.75 kW |
| Rated speed | 3000 U/min |
| Maximum converter supply voltage | 480 V |
| Holding brake | With holding brake |
| Degree of protection | IP64 |
| Shaft end | Cylindrical, Ø 19 × 40 mm |
| Encoder system | AS22DQC, singleturn absolute encoder 22 bit |
| Interface | OCC |
| Connector | M17, rotatable |
| Dimensions | approx. 100 × 100 × 220 mm |
| Weight | 3.75 kg |
Related products
Go to shop 
Siemens 1FK7032-2AK71-1QG1
€750.00
Siemens 1FK7042-5AF71-1EH3
€720.00
Siemens 1FK7032-2AK71-1QG0
€830.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which encoder is installed?
This version has the AS22DQC singleturn absolute encoder with 22 bit resolution.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.