Siemens 1FK7100-5AF71-1AH0
€3,180.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list 35. Documented identifiers and values: 1FK7083-5AF71-1GV5-Z; F402; 16.0 Nm; 100; 50.0 Nm; 37.0 A; KTY84; AM32S/R; 32; 4.096; 24 V; 22.0 Nm; B5; IP65; IP67; 86; 357 Nm; 3.20 kW; S3-60; 700 Nm. Eight poles, a KTY84 temperature sensor and rotatable power and signal connectors form the basic electrical configuration. The documented value for Acceleration torque is Maximum 700 Nm. The documented product data also list F402. The naturally cooled compact motor operates at a rated speed of 3,000 min⁻¹ and provides 10.5 Nm rated torque at 100 K with 7.4 A. The specified stall torque is 16.0 Nm at 100 K; up to 50.0 Nm and 37.0 A are available for short periods. This produces an output speed of 86 min⁻¹, a rated output torque of 357 Nm and 3.20 kW power at S3-60 %. The unit therefore suits conveyor, lifting and positioning axes that require high output torque at low output speed. The exact product designation remains the primary reference when comparing the component with existing equipment and project documentation. The specification table brings together the technical details used to distinguish the component within its product family.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMOTICS S-1FK7 |
| Manufacturer/order/identification number | 1FK7083-5AF71-1GV5-Z |
| Device type | Permanent-magnet synchronous servo motor with parallel-shaft gearbox |
| Rated speed | 3,000 min⁻¹ at 100 K |
| Rated torque | 10.5 Nm at 100 K |
| Rated current | 7.4 A |
| Stall torque | 16.0 Nm at 100 K |
| Maximum torque | 50.0 Nm |
| Maximum current | 37.0 A |
| Cooling | Natural cooling |
| Degree of protection | IP65, drive-end flange IP67 |
| Feedback | Absolute encoder AM32S/R, 32 S/R, 4,096 multiturn revolutions, EnDat |
| Holding brake | Permanent-magnet brake, 22.0 Nm, 24 V DC ±10 % |
| Shaft end | Fitted key and keyway |
| Gearbox output | 86 min⁻¹, 357 Nm at S3-60 % |
| Gearbox power | 3.20 kW at S3-60 % |
| Acceleration torque | Maximum 700 Nm |
Related products
Go to shop 
Siemens 1FK7083-5AF71-1AB0
€1,500.00
Siemens 1FK6063-6AF71-1EB0
€1,490.00
Siemens 1FT7105-5WF71-4KH1
€3,190.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 1FK7083-5AF71-1GV5-Z?
The full manufacturer and type number 1FK7083-5AF71-1GV5-Z is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.