Siemens 1FK6040-6AK71-1EG0
€1,680.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens 1FT6064-1AF71-4AG1 belongs to the SIMOTICS S 1FT6 motor family and is a permanent-magnet synchronous servo motor for controlled industrial axes. The full order number identifies the 1FT6064 frame with natural cooling, a rated speed of 3000 min⁻¹, and standstill torque of 9.5 Nm at 100 K. Electrical feedback is provided by an incremental Sin/Cos encoder with a 1 Vpp signal and 2048 signal periods per revolution. This version has no holding brake. Power and signal are routed through separate connectors; for designation 4AG1, the connector direction is documented as axial toward the drive end. The motor uses IM B5 flange mounting, while IM V1 and IM V3 installation positions are also listed for the exact product. IP65 protection limits dust and water-jet ingress under the specified mounting and connection conditions. The shaft has a diameter of 24 mm, a free length of 50 mm, and a keyway to DIN 6885. The centring spigot measures 110 mm and the square flange outline is 146 mm. For the 1FT6064 with encoder and without brake, the housing length from the flange is 303 mm; including the 50-mm shaft section, the overall length is 353 mm. Documented weight is 12.5 kg, and rated current for this exact version is 6.0 A. Speed code, encoder design, brake option, and connector direction distinguish this motor from adjacent 1FT6064 variants. The designation 1FT6064-1AF71-4AG1 therefore binds the stated electrical and mechanical characteristics to this specific order variant.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S 1FT6 |
| Manufacturer / order / identification number | 1FT6064-1AF71-4AG1 |
| Device type | Permanent-magnet synchronous servo motor |
| Standstill torque | 9.5 Nm at 100 K |
| Rated speed | 3000 min⁻¹ |
| Rated current | 6.0 A |
| Cooling | Natural cooling |
| Protection rating | IP65 |
| Mounting design | IM B5; installation positions IM V1 and IM V3 |
| Encoder | Incremental encoder, Sin/Cos 1 Vpp |
| Encoder resolution | 2048 signal periods per revolution |
| Holding brake | Without holding brake |
| Shaft | Ø 24 mm × 50 mm, keyway to DIN 6885 |
| Dimensions | 146 × 146 × 353 mm (W × H × overall length incl. 50-mm shaft) |
| Weight | 12.5 kg |
Related products
Go to shop 
Siemens 1FK6060-6AF71-1TA0
Price on request
Siemens 1FK6063-6AF71-1AG0
Price on request
Siemens 1FK6063-6AF71-1AH0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What feedback system does the Siemens 1FT6064-1AF71-4AG1 use?
This version uses an incremental Sin/Cos encoder with a 1 Vpp signal and 2048 signal periods per revolution. The complete 4AG1 suffix identifies this encoder configuration.
What are the mechanical dimensions of the 1FT6064-1AF71-4AG1?
The motor uses IM B5 mounting, has a 24-mm shaft with a free length of 50 mm, and weighs 12.5 kg. Overall dimensions including the shaft section are 146 × 146 × 353 mm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.