Siemens 1FT6132-6AC71-4AE0
€6,200.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
With 70 Nm rated torque and 2000 U/min, the Siemens 1FT6108-8AC71-4AE0 is clearly positioned within the SIMOTICS S 1FT6 series. This permanent-magnet three-phase synchronous motor uses natural cooling and is specified for 100 K thermal utilisation. Its mechanical base design is IM B5; IM V1 and IM V3 are listed as mounting positions. Feedback is provided by a Sin/Cos incremental encoder with a 1-Vss signal and no DRIVE-CLiQ interface. Power and signal connections use plug connectors. The connector outlet points axially towards the drive end. This exact identifier combines the encoder with a keyed shaft, runout accuracy R and a holding brake. Vibration severity is N, and the degree of protection is IP64. Electrical feedback, shaft design, brake and connector direction are therefore separate variant characteristics. The motor has a shaft height of 100 mm. For the version with holding brake, its installation length is 516 mm; width and height are each approximately 240 mm. Variant-specific weight is 60 kg. The braked version has a moment of inertia of 286 × 10^-4 kgm². The flange contour measures 215 × 215 mm, while the outer cross-section reaches approximately 240 × 240 mm. This flange version remains assigned to the IM B5 design. Length and mass differ from the version without a brake, so the values of the braked design apply to this product. The complete order number 1FT6108-8AC71-4AE0 remains unchanged in the title, specifications and SEO data. Technical identification considers rated torque, rated speed, encoder type, brake, shaft, connector direction and installation dimensions together; none of these details is inferred from an abbreviated family designation.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S 1FT6 |
| Manufacturer/order/identification number | 1FT6108-8AC71-4AE0 |
| Device type | Three-phase synchronous servomotor |
| Rated torque | 70 Nm |
| Rated speed | 2000 U/min |
| Thermal utilisation | 100 K |
| Cooling | Natural cooling |
| Design | IM B5 (IM V1, IM V3) |
| Connection type | Power and signal plug connectors |
| Connector outlet | Axial on the drive end |
| Encoder system | Sin/Cos incremental encoder 1 Vss, without DRIVE-CLiQ |
| Shaft | With key, runout accuracy R |
| Holding brake | Present |
| Degree of protection | IP64 |
| Vibration severity | N |
| Shaft height | 100 mm |
| Moment of inertia | 286 × 10^-4 kgm² (with holding brake) |
| Dimensions | approx. 516 × 240 × 240 mm (L × W × H) |
| Weight | 60 kg |
Related products
Go to shop 
Siemens 1FT6108-8AC71-4AG0
€2,670.00
Siemens 1FT6086-1AF71-1AG1
€680.00
Siemens 1FT6084-8AC71-1EG0
€1,480.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What torque and speed does the Siemens 1FT6108-8AC71-4AE0 have?
This version is specified with 70 Nm rated torque and 2000 U/min rated speed.
Which encoder and brake version is installed?
The configuration includes a Sin/Cos incremental encoder with a 1-Vss signal without DRIVE-CLiQ and a holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.