Siemens 6AG1 443-5DX05-4XE0
€2,010.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A power supply and an IM 153 interface module fit on the active bus module Siemens 6AG1195-7HA00-2XA0. Within SIPLUS ET 200M, this version takes on the role of the BM PS/IM. Its module slots take one PS and one IM; this distinguishes its population from bus modules for two interface modules. The assembly belongs to the SIPLUS-extreme version for extended ambient conditions. For the specific order with shipping from Germany to the United States and other international destinations, the complete order number designates this active bus module and its PS/IM arrangement. An essential characteristic is the operating temperature range of −40 to +70 °C. For applications under UL/cUL, ATEX and FM conditions, however, the upper limit is +60 °C. The maximum permissible installation altitude extends up to 5000 m above sea level, with the temperature limit decreasing as the altitude increases: above 2000 to 3500 m, Tmax minus 10 K applies; above 3500 to 5000 m, Tmax minus 20 K applies. The range of −40 to +70 °C also applies to storage and transport. The ambient data cover up to 100 % relative humidity including condensation and frost; commissioning under condensation is excluded. For chemically active substances, class 3C4 according to EN 60721-3-3 is specified at less than 75 % relative humidity, and for mechanically active substances class 3S4 including sand and dust. These classifications require that the supplied covers remain on unused interfaces during operation. The module measures 97 mm in width, 92 mm in height and 30 mm in depth.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIPLUS ET 200M |
| Manufacturer/order/ident number | 6AG1195-7HA00-2XA0 |
| Device type | Active bus module BM PS/IM |
| Module role | 1 power supply PS and 1 IM 153 |
| Operating temperature | −40 to +70 °C; with UL/cUL, ATEX and FM maximum +60 °C |
| Storage and transport temperature | −40 to +70 °C |
| Installation altitude | Maximum 5000 m above sea level |
| Temperature derating by installation altitude | Above 2000 to 3500 m: Tmax −10 K; above 3500 to 5000 m: Tmax −20 K |
| Relative humidity | Up to 100 % including condensation/frost; no commissioning with condensation |
| Chemically active substances | EN 60721-3-3, class 3C4 at relative humidity below 75 % |
| Mechanically active substances | EN 60721-3-3, class 3S4 including sand and dust |
| Dimensions | 97 × 92 × 30 mm (W × H × D) |
| Weight (reference type not specified) | 111 g |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which modules does the BM PS/IM accommodate?
The active bus module accommodates a PS power supply and an IM 153 interface module.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.