Siemens 6ES7 412-2EK07-0AB0
Price on request
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list S7. Siemens specifies a combined MPI/PROFIBUS DP interface, an integrated PROFINET interface with two ports and an optional PROFIBUS DP interface provided through a plug-in IF 964-DP. The exact MLFB is important because related CPU-414 variants may have different interfaces, memory configurations or system limits. Technical characteristics include typical power dissipation of 6.5 W, power supplied through the system power supply, memory expansion using a FEPROM or RAM memory card, and dimensions of 50 mm in width, 290 mm in height and 219 mm in depth. Documented identifiers and values: 6AG1; 414-3EM07-7AB0; S7-400; S7-400; S7-400; 24 V; 300; 6.5 W; S7-400; 50; 290; 219 mm; 900 g; UR1; UR2. The documented value for Dimensions is 50 x 290 x 219 mm. Siemens 6AG1 414-3EM07-7AB0 is the SIPLUS version of the SIMATIC S7-400 CPU 414-3 PN/DP. The documented value for Power dissipation is typically 6.5 W. At approximately 900 g, this is a full-size control-cabinet module rather than a small I/O accessory. The documented value for Weight is approx. 900 g. The documented value for Product series is SIPLUS S7-400 / SIMATIC S7-400. The specification lists Product series: SIPLUS S7-400 / SIMATIC S7-400. The CPU supports PROFINET IO Controller and Device operation, PROFIBUS DP Master and Device operation, routing, Open IE Communication and multicomputing with up to four CPUs in a suitable rack.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIPLUS S7-400 / SIMATIC S7-400 |
| Manufacturer/Order/Identification number | 6AG1 414-3EM07-7AB0 |
| Equipment type | S7-400 CPU module |
| Product designation | CPU 414-3 PN/DP |
| Power supply | via the system power supply on the backplane bus |
| Backplane bus current consumption | 24 V DC, max. 300 mA |
| Power dissipation | typically 6.5 W |
| PROFINET functions | PROFINET IO Controller and PROFINET IO Device |
| PROFIBUS functions | PROFIBUS DP Master and PROFIBUS DP Device |
| Memory | RAM, expandable with a memory card for FEPROM or RAM |
| Multicomputing | up to 4 CPUs with UR1 or UR2 |
| Dimensions | 50 x 290 x 219 mm |
| Cooling method | passive module heat dissipation within the S7-400 rack |
| Weight | approx. 900 g |
Related products
Go to shop 
Siemens 6ES7 416-2FN05-0AB0
€450.00
Siemens 6ES7 414-3EM07-0AB0
Price on request
Siemens 6ES7416-3ER05-0AB0
€1,600.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6AG1 414-3EM07-7AB0?
The full manufacturer and type number 6AG1 414-3EM07-7AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.