Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
With dimensions of approximately 151 × 151 × 161 mm, the Siemens 6ES5 095-8MA03 combines control and integrated I/O in an S5-95U compact controller. This version has 16 KB of STEP-5 user memory. Binary signals are handled by 16 digital inputs and 16 digital outputs; both groups operate with 24 V DC. Each digital output is rated for 0.5 A. Four interrupt inputs and two counter inputs are also provided. The counter channels cover 5 kHz and 2 kHz respectively, adding fast acquisition functions to the standard inputs and outputs. Eight analog inputs process voltage signals from 0 to 10 V. Depending on the terminal assignment, the single analog output can be used as a voltage output from 0 to 10 V or as a current output from 0 to 20 mA. Digital signals connect through a 40-pin front connector. A 15-pin Sub-D connector is provided for analog signals; interrupt and counter signals use a separate 9-pin Sub-D connector. The integrated PG interface operates as a 20-mA current-loop interface and provides access for a programming device, operator panel or computer. The mechanical configuration includes the enclosed compact housing and mounting on a profile rail. The base unit contains the processor, power supply and digital and analog inputs and outputs. For expansion, the S5-95U can connect additional modules from the S5-100U family through the peripheral bus. The specific order number identifies the standard version without an additional SINEC-L2 interface, second serial interface or L2-DP interface. Order number 6ES5 095-8MA03 identifies this documented standard version of the compact S5-95U base unit.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC S5 / S5-95U |
| Manufacturer/order/identification number | 6ES5 095-8MA03 |
| Device type | S5-95U compact controller |
| User memory | 16 KB for STEP 5 |
| Digital inputs | 16 × 24 V DC |
| Digital outputs | 16 × 24 V DC, 0.5 A per output |
| Analog inputs | 8 × 0 to 10 V |
| Analog output | 1 × 0 to 10 V or 0 to 20 mA |
| Interrupt inputs | 4 |
| Counter inputs | 2, of which 5 kHz and 2 kHz |
| Programming interface | 1 × 20-mA current-loop interface for PG/OP/PC/SINEC L1 |
| Digital connection | 40-pin front connector |
| Analog connection | 15-pin Sub-D female connector |
| Interrupt/counter connection | 9-pin Sub-D female connector |
| Dimensions | 151 × 151 × 161 mm |
| Weight | 1,244 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which inputs and outputs does the Siemens 6ES5 095-8MA03 provide?
The S5-95U compact controller provides 16 digital inputs and 16 digital outputs for 24 V DC, eight analog inputs from 0 to 10 V, one analog output for 0 to 10 V or 0 to 20 mA, plus four interrupt inputs and two counter inputs.
Which connections are documented for the 6ES5 095-8MA03?
Digital signals connect through a 40-pin front connector. A 15-pin Sub-D female connector is provided for analog signals and a 9-pin Sub-D female connector for interrupt and counter inputs. The unit also has a 20-mA PG interface.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.